Technical data

Operation
OSD menu functions
The OSD menu for analogue monitor operation is described below. During
digital operation some functions are not available, they are not needed be cau se
of the digital transmission technology being used.
Adjusting the brightness and contrast
Call up the Brightness/Contrast setting window
Brightness
Set the brightness of th e disp
lay
With this function you change t
he brightness of the background lighting.
Yo u can see whether the ECO oper
ating mode is active under the bar for
displaying the brightness set
ting.
Contrast
Set the contrast of the d isplay
With this function you modify the contrast of bright colour tones.
Black level
Set the brightness of th e display
With this function you modify the contrast of dark colour tones.
Auto level
Adjust the signal level
With this function you can automatically set the contrast.
The function is executed w ith the
SELECT / MENU
button.
If the contrast is set too high, bright surface s can no longer be distinguished from very
bright surfaces. If the contrast is set too low, the maximum brightness will not be achieved.
Adjusting the picture size and position
Call the Image adjust setting window
Phase
Eliminate picture disturbance
With this function yo u fine-tune your monitor to eliminate picture disturbance.
Clock
Set synchronisation
With this function you adjust the picture width to eliminate vertical picture
disturbances.
H-Position
Adjust the horizontal position
With this function you move the pic ture to the le ft or to the r ight.
V- Position
Adjust the vertical position
With this function you move the picture up or down.
18 A26361-K1320-Z220-1-7619, edition 2