Operation Manual

Getting started
Removing monitor base
Before you can use a swivel arm or a similar accessory, you must remove the monitor base.
The display surface is su sceptible to scratching!
1
2
3
► Switch off the monitor and pull the power
plug out of the po w er so cket.
► Lay the monitor on its face on a soft surface.
► Remove the c over and disconnect all cables.
► Release the base stand by pre ssin g the
slider down (1). Move it in the direction of the
arrow (2) and lift the base stand upwards (3).

Yo u can now mount a swivel arm or a
similar accessory in accordance with VESA
FPMPMI using a hole spacing of 100 mm.
For instructi
ons on how to mount the swivel arm or a similar accessory, please
see the docume
ntation for the swivel arm or similar accessory.
16 Fujitsu