User's Manual

49
2 Attach the top band to the belt attachments.
You may attach the top band to either side but it will be easier to adjust if
the hook-and-loop fastener is on your dominant hand side.
1. After a side of a top band that is cut roundly is put into a hole on
the belt attachment, the top band is inserted to the adjuster from
the outside to the inside.
2. The top band is inserted into the adjuster as shown in the figure
and fixed.
3. After opposite side of the top band is inserted into a hole on
the belt attachment, pass the top band into a rubber band and
attach the fixed hook-and-loop fastener.