C150-E187-01EN Scanner Utility for Microsoft Windows <32bit> Version 8.
Introduction Thank you for purchasing the "Scanner Utility for Microsoft Windows V8.0". This software contains a TWAIN-compliant image scanner driver (simply called "driver" in this guide) and utilities. This guide provides a description summary of the driver, as well as a description of the installation method and procedures for appropriate use. Please read this guide before starting to use the software. In addition, read the README.
Trademarks MS-DOS, Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. IBM PC/AT and DOS/V are registered trademark of International Business Machine Corporation. Adaptec is a registered trademark of Adaptec Inc. EZ-SCSI is a trademark of Adaptec Inc. Other product names are the trademarks or registered trademarks of the respective companies.
Organization This manual explains how to install and use this driver, and how to use the TWAIN scanning utility. • TWAIN This section gives an overview of the TWAIN specification. • Installation This section explains the procedure for installing the environments in which this driver may operate. • Using the Driver This section explains how to use the driver.
Contents 1. Outline............................................................................................. 1 1.1 Characteristics of this Driver........................................................................... 1 1.2 Operating Environment................................................................................... 1 1.3 Explanatory Notes .......................................................................................... 2 1.4 Explanation of terms..................................
5.1 Start-up......................................................................................................... 52 5.2 [File] menu.................................................................................................... 53 5.3 [Help] menu .................................................................................................. 54 5.4 Gamma Pattern Editing ................................................................................ 55 6.
1. Outline 1.1 Characteristics of this Driver • This driver complies with TWAIN regulations V1.8 (the latest version as of May 2000), which are global standards for image scanners. The driver can be used in all TWAINcompliant applications. • This driver also supports an image scanner that has the "double-sided scan" function. If the application supports continuous scan, a double-sided document can be scanned. 1.
1.3 Explanatory Notes The descriptions in this manual are prepared based on the following rules: ◊ Menus and buttons The menus and buttons used in the program description are enclosed in []. Example: [File] menu, [OK] button ◊ Keyboard The keytop indications comply with the standard keyboard of the Fujitsu FMV series. Major differences between the Fujitsu FMV keyboard and other keyboards are shown below.
1.4 Explanation of terms ◊ IPC option board IPC-2/2D in this guide refers to the IPC-2 and IPC-2D image processing circuit. IPC-3/3D in this guide refers to the IPC-3 and IPC-3D option board.
2. TWAIN 2.1 TWAIN TWAIN is the specification that defines the standard software protocol and application programming interface (API) for data exchange between a software application program and an image input device such as the image scanner. [TWAIN development background] In the past, development of a new scanner inevitably required the development of a compatible driver and a sample (demonstration) program exclusively designed for the new scanner.
•Application software (photo retouching software, etc) ‚Source manager (TWAIN.DLL/TWAIN_32.DLL, etc) ƒSource (Image scanner control of the driver, etc) Image scanner, etc.
3. Installation 3.1 Preparation 1. Check that the operating system is installed correctly. 2. Check that the SCSI adapter is connected to the computer. 3. Check whether the SCSI driver and ASPI manager are installed correctly and operating (For windows 2000, 4.60 or later) Note Version 4.01 or later of the ASPI Manager is required. Use Explorer or a similar program to check the version number of the WNASPI32.DLL file. The environment setup tools described later can be used for checking. 4.
Figure Fujitsu TWAIN group 3.3 Uninstall The uninstall process removes the software and returns the hard disk to its pre-installation state. 1. Click on [Start], followed by [Settings], and then [Control Panel]. The Control Panel is then displayed. 2. Double-click on "Add/Remove Programs" from the icon list of the Control Panel. The panel of properties of [Add/Remove Programs] is displayed. 3. Select "Scanner Utility for Microsoft Windows" from the "Install/Uninstall" list. 4.
4. Using the Driver 4.1 Selecting the Driver To use this driver from the TWAIN application, select "FUJITSU TWAIN32" from the TWAIN data source (driver) selection screen. For general application, the data source selection screen is displayed by selecting the [Select Scanner] or [Acquire ...] menu. Refer to the instruction manual for the application used for details.
4.2 Screen Configuration Figure Main Dialog The following pages contain the explanation and operation description for each part.
4.3 Displaying Driver Information ♦ Image scanner name The model name, option port name, and capacity of internal scanner memory (in units of megabytes) of the connected image scanner are displayed. If no image scanner is connected, this field is blank. To change the selected scanner, click the [Select ...] button to display a list of connected scanners and select a scanner from the list. The type of IPC option board is displayed if an image-processing option board is installed in the scanner.
♦ Data size The approximate amount of data per image when data is scanned in the present option. Note This value is the amount of uncompressed data. The size of the stored file will differ from this value and is usually smaller if image compression is chosen and the image is compressed. 4.4 Setting Information on Image Scanning ♦ Current side When a scanner that allows duplex scanning is used, specifies the page which sets the image scanning information.
♦ Paper Size Selects a paper size corresponding to the size of the document to be scanned. Select a standard paper size from the list or [Custom]. If [Custom] is selected, the "Custom Paper Size Setting" dialog appears. Enter the size of the document to be scanned. Some paper sizes may not be accepted by your device. See "Relevant Image Scanner Specification" in Appendix. Figure Custom paper size setting dialog To specify a custom paper size, use the slider or enter the paper size directly.
♦ Scan Type Selects the feeding device. The image scanner uses a document bed called the flat bed as well as an automatic document feeder (ADF) for feeding scanned document. The ADF usually enables the documents to be scanned only once. The flat bed allows scanning the same documents repeatedly. ♦ Flatbed Reads a document placed on the flat bed of the device. ♦ ADF (Simplex) Reads the document on the device's automatic document feeder (ADF). Here, only one side is read.
♦ Long page (front and backside) In the same case as that for scanning the front of a long page, this option is selected in order to scan the entire side of a long page whose length exceeds the vertical size of an A3 sheet. If this option is selected, the document is scanned in the "front to back to front to back…" order. Paper feeding method that is to be supported varies with the type of scanner. See "Relevant Image Scanner Specification" in the Appendix.
This option specifies whether to distinguish line drawing from photograph image during scanning. If this option is selected, the line drawing part is scanned using "Black & White," and the photograph part is scanned using "halftone". This information is most suitable for documents containing both photographs, and line drawings or text. SEE (Selectable edge enhancement) Line drawing and photograph image are scanned using "halftone." Then, only line drawing part is highlighted.
Dither Pattern 2 Executes pattern processing that is suitable for scanning a light photograph. Dither Pattern 3 Executes pattern processing that is suitable for scanning a light-colored document containing both text and photographs. Download Pattern Executes processing using the dithered download pattern specified in the dithered download file (described later). Some scanner models do not support this function. See "Image Scanner Specification" in Appendix.
In addition, if "Auto Binary" is selected, the scanner will automatically use the appropriate threshold value. As a result, the set value cannot be changed. If the light color in the scanned document is read as white, increase the threshold value. To eliminate light- colored areas in the scanned document, decrease this value.
♦ Contrast: Sets the contrast of light and shadow in a scanned image. Specify the contrast with a number in the range of 1 (low [soft]) to 255 (high [sharp]). The contrast can be set if "Gray Scale" is selected in "Image Mode." If this value is increased, the dark part of the image is shown darker and the light part is shown lighter. Some scanner models do not support this function. See "Relevant Image Scanner Specification" in Appendix. 4.
Progress indicator ♦ [Close] / [OK] Closes the dialog box without scanning. If a setting is changed, the changed setting is saved in the initial value file. ♦ [Reset] Restores the current setting values to the status immediately after the window is opened. ♦ [Help] Displays online help. When the [F1] key is pressed, help information regarding the item on which the cursor is placed is displayed. Note Depending on the application used help information may not be displayable with the [F1] key.
♦ [Advance] Displays the "advance dialog " for settings related to color variance and image processing. ♦ [Config] Displays the "basic scan dialog" for managing the settings file and for setting simple scan dialog switching. ♦ [About] Express the version of this driver by clicking this button. 4.6 Setting "Scanning Area" Specify the scan area in the preview window as follows: Setting: 1. Press the left mouse button to specify the origin (top left corner) of the scanning area.
4.7 Setting Options The "option dialog" is used to set device-specific functions and the items that differ depending on whether the scanner used supports them. The option specification is divided into "Rotation", "Job/Cache", "Generic", and "Endorser". The supported options depend on the scanner. See "Relevant Image Scanner Specification" in the Appendix. ( is displayed for options that cannot be used.) The option dialog in this driver is explained below. The commonly used buttons are explained first.
The options are described below: Figure Option dialog (Rotation) ♦ Flip Side Rotation Specifies the binding of the document when both sides are scanned using ADF. Book Outputs the scanned image for both sides as is. Select this option to scan documents bound on the left or right side. Fanfold Scans only the back side and outputs the scanned image rotated 180 degrees. Select this option to scan documents bound on the top or bottom.
♦ Rotation Degree Outputs the scanned image rotated to the right or left 90 degrees. 0.0 degree Outputs the scanned image as is. 90.0 degree Outputs the scanned image rotated 90 degrees to the right (clockwise). -90.0 degree Outputs the scanned image rotated 90 degrees to the left (counterclockwise). 180.0 degree Outputs the scanned image rotated 180 degrees (top and bottom reversed).
Figure Option dialog (Job/Cache) ♦ Caching Specifies whether to preread (cache) when a document is scanned. This option enables faster scanning. If processing of the application being used slows down and scanning stops, this option can be used to prevent degradation of the scanning speed. (The effect, however, depends on the environment being used.) None Caching is not performed. Read ahead One document page is scanned, and the data is preread and stored in PC memory (main memory of the personal computer).
Ram cache Prereads the allowable amount based on the allocated memory size and stores the data in PC memory. A memory size between 1 and 200 MB can be set. Use Memory on Scanner Prereads using the memory installed in the scanner (displayed only if supported by the scanner). ♦ Batch Detection The application can detect documents on a specific type of form (special paper). The application must support this function. None No detection. Scanning is done without change.
♦ Double Feed Detection This option detects a double feed (occurs when two or more documents are sent) based on the set condition. If a double feed is detected when this setting has been turned on, the device will stop and an error message output. None Double feed detection is not performed. Hardware Setting A double feed is detected based on the device setting. Check thickness The thickness of the transmitted document is checked by the sensor in the device.
This option is valid only when the cache setting is set to [Use Memory on Scanner]. In addition, this option cannot be used unless it is supported by the scanner. *1: Ratio of black dots included in the scanning area (for blank pages) Figure Option dialog (Generic) ♦ Unit/Scaling This option selects the unit for the scanning area and preview window. One inch is calculated as 25.4 millimeters. When inches are converted to millimeters, values are rounded off.
Note The TWAIN specifications require that the data width be arranged in units of 32 bits. As a result, a difference of up to 31 dots can be included, depending on the value set. Figure Option dialog (Endorser) ♦ Enable Endorser Specifies enabling or disabling the endorsement function of the device. When the option is selected and scanning has been completed, the scanned originals are printed or a stamp is imprinted according to the instructions below. This applies only to stamp or endorser options.
♦ Direction (Printing) Specifies the direction of endorsement strings. When the direction is perpendicular to the direction of scanning, designate "Up to bottom". Only this version of the device permits the direction to be specified. ♦ Surface (Printing) Designates the side for printing or stamp imprinting. If the side is opposite the scanned surface, select "Back." Select "Front" for the scanned surface. If both sides are scanned, the side scanned first is considered to be the "Front.
♦ Endorsement String Specifies the endorsement string. The following definitions can be used. They may also be selected from the menu, which is displayed by clicking on ">". %YYYY: The year is printed in four digits using the Western calendar. %YYY: The year is printed using the two digits of the Japanese calendar (current, or Heisei era). %YY: The year is printed in the last two digits of the Western calendar.
4.8 Setting Advance Options The "advance dialog" is used to set items related to image processing. The settings apply to device-specific functions and items that differ according to whether the scanner used supports them. The advance option specification is divided into "Color Variance", "Image Processing", and "Auto Binary". The supported options depend on the scanner. See "Relevant Image Scanner Specification" in the Appendix. ( is displayed for options that cannot be used.
The options are described below: Figure Advance dialog (density correction) ♦ Gamma Pattern This option corrects distortions from nonlinear image representation. Scanner sensors are generally designed to generate output linear to the density of the light reflected from the document. However, most output terminals do not produce output that has the desired linear relation to the input, and the resulting distortion must be corrected.
When "Download Pattern" is selected, the above dialog box opens. Select the gamma pattern download file to be used from the list of file names. Then, press the [OK] button. Correction will then be executed using the selected gamma pattern. If the gamma pattern download file has not been registered in the list of file names, use the [Add] button to register the file. See "Download Pattern File" for information about how to specify the file. When "Custom" is selected, a custom specification can be entered.
♦ Dropout Color This option enables scanning excluding the selected color information of green, red, or blue (the three primary colors of light). For example, to scan black characters framed in red, selecting red for scanning will scan only the black characters. ♦ Reverse This option specifies whether to reverse the black and white of a scanned image. If this option is selected, black and white are reversed by reversing the black and white pixels.
♦ Edge Processing This option specifies the sharpness of a scanned image. Select "None", "Edge Extract", or "Smoothing (Background Removal)". None Edge processing is not performed. Edge Extract This option outputs an image with the edge extracted. If this option is selected, the boundary between the black part and white part in a closed area is traced and the edge extracted. "DTC Variance" and "Edge Extract" are mutually exclusive.
This option is valid only when "Simple auto binary" is set. Figure Advance dialog (DTC Mode) ♦ Scan mode This option selects one of the following two scan modes: [for OCR]: This mode is for text recognition applications where irregularity in the image is undesirable. [for Image]: This mode is for image scanning applications that scan images without prior smoothing. The specification changes the specifiable items and members for "Threshold Curve" and "Gamma Curve".
♦ Density curve This option specifies the relationship between the threshold value and the maximum density. This specification method depends on the [Scan mode] setting. In [for OCR] mode, use the slider to set the inclination and density level. To specify the value, drag the tab of the slider to the desired setting position. The current setting value is displayed on the right. (figure on the left) In [for Image] mode, select [Normal] or [Lightest].
♦ OCR Smoothing This option specifies whether to enable the function that modifies the zigzag lines in the line drawing to smooth curves. If this option is selected, the smoothing function is enabled. For IPC-3/3D, either [Noise Removal] or [Smoothing] can be selected. ♦ Noise Removal This option automatically removes spots that appear as black stains in a white area and spots that appear as white stains in a black area.
Figure Advance dialog (Color) ♦ Shadow/Highlight Shadow : The highlight allows the darkest part of the document to be controlled. The higher the shadow value, the darker the image. Highlight : The highlight allows the brightest part of the document to be controlled. The higher the highlight value, the lighter the image.
increased, the dark part of the image is shown darker and the light part is shown lighter. Some scanner models do not support this function. See "Relevant Image Scanner Specification" in Appendix. Brightness : Sets the brightness of the overall image. Specify the brightness with a number in the range of 1 (bright) to 255 (dark). To brighten the overall image, decrease the value of the setting. To darken the overall image, increase the value.
Figure Advance dialog (Quality) ♦ Image Emphasis This option specifies the sharpness of a scanned image. Select "None", "De-Screen" or "Emphasis". None Edge processing is not performed. Emphasis This option outputs an image with the edge emphasized. "Emphasis High", "Emphasis Mid", or "Emphasis Low" can be selected. If "Emphasis High" is selected, the image becomes sharper. If "Emphasis Low" is selected, the image appears less distinct.
De-Screen "De-Screen Level 1", "De-Screen Level 2", "De-Screen Level 3", or "De-Screen Level 4" can be selected. This option eliminate moirés patterns. To eliminate more effectively, higher level is selected. ♦ White Level Follower Select this option to scan a document whose background color is not white, such as a newspaper. Select "Auto", "Enable", or "Disable". When "Enable" is selected, the document is scanned using background follow-up (for line drawings).
4.9 Setting the Configuration Options These options are used to manage the setting files, and switch the basic scan dialog display. Press the [Config] button of the main dialog to open the [Configuration] dialog box shown below. Figure Option dialog box (simplified DTC) ♦ Setting Files The setting information of the scan conditions can be saved in a “Setting file.” Scan condition settings that have been set in advance in this dialog can be selected from the list of setting files.
♦ FTS File Information The information of the setting file selected in [Setting Files] is displayed. ♦ [Show this dialog next open] checkbox If this checkbox is checked, [Basic Scan Dialog] will be activated the next time the driver is activated. ♦ [OK] button Makes the new setting valid, closes this dialog box, and returns to the main dialog. ♦ [Add] button Adds the setting of the current driver to a setting file. Pressing the [Add] button opens the [File addition] dialog.
Filename: Specify the name of the file used to save the settings. ♦ [Delete] button Deletes unnecessary setting files. Select the setting file to be deleted and then press the [Delete] button. A confirmation dialog will be displayed. Press the [OK] button to delete the setting file. To cancel, press the [Cancel] button. ♦ [Help] button Displays online help.
4.10 Basic Scan Dialog The basic scan dialog contains only the minimum functions required for scanning. The detailed setting functions of the main dialog have been omitted. Scanning can be easily performed by selecting a registered setting file. The basic scan dialog is also useful for avoiding incorrect operations when standard work is performed.
♦ FTS File Information The contents of the selected file are displayed. ♦ [Scan] button Executes scanning based on the contents of the setting file. ♦ [OK] button Terminates without performing the scan operation. ♦ [Adjust] button Switches from the basic scan dialog to the main dialog. ♦ [Help] button Displays online help. ♦ [Show this dialog next open] checkbox If this checkbox is checked, the [Basic Scan Dialog] will be opened at the next startup.
4.11 Download Pattern File The "download pattern file" of this driver is a file that defines the patterns to be used by the scanner to execute various image processing. This file is available in the following two versions. Each version can be selected using the [Download Selection Dialog] that opens when [Download] is selected. The file is a text file that conforms to the following rules. Use an appropriate text editing program (for example, "Note Pad" in the operating system) to edit the file.
Example 8, 8, 128, 128, 128, 128, 128, 128, 128, 128, 255, 128, 128, 128, 128, 128, 128, 128, 255, 255, 128, 128, 128, 128, 128, 128, 255, 255, 255, 128, 128, 128, 128, 128, 255, 255, 255, 255, 128, 128, 128, 128, 255, 255, 255, 255, 255, 128, 128, 128, 255, 255, 255, 255, 255, 255, 128, 128, 255, 255, 255, 255, 255, 255, 255, 128, 49
♦ Gamma download pattern file Any user defined gamma correction processing can be performed by downloading the pattern from the gamma download file to the scanner. The defined pattern becomes effective when [Download Pattern] is selected for [Gamma Pattern]. Some models do not support this file. See "Relevant Image Scanner Specification" in Appendix. Although the standard extension of the file name is ".
Example 256, 256, 255, 254, 253, 252, 251, 250, 249, 248, 247, 246, 245, 244, 243, 242, 241, 240, 239, 238, 237, 236, 235, 234, 233, 232, 231, 230, 229, 228, 227, 226, 225, 224, 223, 222, 221, 220, 219, 218, 217, 216, 215, 214, 213, 212, 211, 210, 209, 208, 207, 206, 205, 204, 203, 202, 201, 200, 199, 198, 197, 196, 195, 194, 193, 192, 191, 190, 189, 188, 187, 186, 185, 184, 183, 182, 181, 180, 179, 178, 177, 176, 175, 174, 173, 172, 171, 170, 169, 168, 167, 166, 165, 164, 163, 162, 161, 160, 159, 158, 157,
5. Using the Gamma Pattern Editor 5.1 Start-up Click on "Start" and select "Download Pattern Editor" from "Scanner Utility for Microsoft Windows" under "Programs.
5.2 [File] menu ♦ [Load] This menu is used to read the Gamma Download file and display the graph and gradations. The name of the open file is displayed above the graph area. ♦ [Save] The gamma pattern currently being edited is saved in the file whose name is displayed above the graph area. If no filename is displayed, the pattern is named and saved in that file. ♦ [Save As] The gamma pattern currently being edited is named and saved in that file. The saved filename is then displayed above the graph area.
5.3 [Help] menu ♦ [About] Information related to this editor and its version number is displayed.
5.4 Gamma Pattern Editing ♦ Graph Area The graph area is a 256-dot × 256-dot white square area bordered by black lines, where the relationship between the input values of 0 to 255 (x axis) and output values of 0 to 255 (y axis) is indicated in blue lines. Each graph dot represents one division (unit). ♦ Gradation The input is displayed in black and white in 256 single-dot steps from 0 at the left border to 255 at the right border. The gama function of the scanner is displayed.
6. How to Use the FUJITSU Scanner Control Center 6.1 Outline This software that is resident in the system continuously monitors the scanner connected and starts the target application in response to an instruction from the operation panel in the scanner. (Pressing the start button on the scanner starts the application that has been set in advance.) For applicable models, see "Relevant Image Scanner Specification" in the Appendix. 6.
Right-clicking the icon displays the following pop-up menu. Left-clicking the icon displays the scanner being connected as shown below. The scanner that has been monitored by this application is indicated with a check mark. 6.3 Pop-up Menu ♦ [Rescan Scanner] Rescans the scanner that is currently connected. A scanner that is not recognized by the OS cannot be found even though it is rescanned. ♦ [Option] Sets up the application to be started when the start button of the scanner is pressed.
♦ [Path] Specifies a file name of the application to be started with its absolute pathname. A file can be also selected directly by using the […] button. ♦ [Argument] Specifies an argument to be passed when starting the specified application. (This item can be omitted.) ♦ [Start in] Specifies a default folder for starting the application. A default folder can be also selected by using the […] button. (This parameter can be omitted.) ♦ [Run] Specifies the display size of the application to be started.
♦ [Use Plug-In] Checking this check box specifies a plug-in. (A plug-in is an additional program for adding a new function to the application.) ♦ [Setting] Sets a plug-in in accordance with the following procedure: • Pressing the [Setting] button after selecting a target plug-in name in the plug-in list displayed displays the plug-in setting screen. • Pressing the [OK] button after setting each item reflects the settings for the application to be started. ♦ [Install] A new plug-in can be installed.
Selecting "Yes" displays a dialog box below. (If "No" is selected, the function to start any application when the start button in this application is pressed is disabled.) Pressing the [OK] button after selecting one of function keys from F1 to F3 enables assigning a function key to the start button. If the [Cancel] button is pressed, the function key is not assigned to the start button.
Left-clicking the task tray icon displays connected scanner names on the pop-up menu. It is also possible to select a scanner on this menu. ♦ [Help] Displays help information concerning to this application. ♦ [About] Displays version information concerning to this application. ♦ [Exit] Terminates this application.
7. Troubleshooting 7.1 Error Messages 7.1.1 Messages from the TWAIN Driver • • • • • The input value is outside the range. Cause: A value exceeding the range allowed for an input item was input. User response: Input a value inside the allowed range. Refer to the input item or the image scanner specification for the range. The input value is not acceptable. Cause: A value exceeding the range allowed for an input item was input. User response: Input a value inside the allowed range.
• The value for custom paper is higher than the maximum scan size. Width needs to equal 279 mm or less and length needs to equal 420 mm or less. • The value for custom paper is higher than the maximum scan size. Width needs to equal 11 inch or less and length needs to equal 16.53 inch or less. • The value for custom paper is higher than the maximum scan size. Width needs to equal xxx pixel or less and length needs to equal xxx pixel or less.
• • • • • Description not specified. Cause: The description of the setting file has not been specified. User response: Enter the description of the setting file in the description field. Then, try scanning again. Filename not specified. Cause: The filename of the setting file has not been specified. User response: Enter the filename of the setting file. Then, try scanning again. Specified string is too long. Cause: The specified string is too long.
• • • • • • An input-output error occurred in the image scanner. Cause: A fault occured during the scan operation of the image scanner. There may be a fault in the image scanner itself. User response: Turn off the power of all devices, then turn on the power of the computer before turning on the scanner and retry scanning. If the error still occurs, contact the retail store where the image scanner was purchased, or the nearest service center.
• • • • • The current parameter(s) is (are) not allowed. Please use (an)other parameter(s) and try scanning again. Cause: An incorrect value has been specified for the image scanner. The problem may be due to an illegal combination with the specification value from the application. User response: Change the specification values. Then, try scanning again. The scanner is in an irregular status; fuse is broken, etc. Please check the scanner status.
• • • Illegal format or data in download file. Cause: The format of the specified download file is illegal or the data is incorrect. User response: User response: Use an editor to check file format and data. ASPI manager not found. Cause: The ASPI manager may not have been installed, or may have been deleted. User response: Reinstall the products, including the ASPI manager attached to the SCSI board. Then reboot the PC. Scanner DLL file not found.
User response: • Contact the retail store where the product was purchased or the nearest maintenance service center. A general fault of the DAT_XXXXX, MSG_SET, and unsupported type response. (Internally) Cause: This is a program error that usually occurs while making the internal data settings. User response: Contact the place of purchase or your nearest maintenance and service center. • An undefined error occurred • Processing cannot be continued because of insufficient memory.
7.1.2 Error messages relating to gamma correction pattern editing • • • • Enter a positive decimal value. Cause: A value other than a number has been entered as the gamma correction value. Alternatively, 0 or a negative value has been entered. User response: Reenter a valid value. The file could not be created. Cause: The file for saving could not be created. There is insufficient space to save the file or the disk to which the file was to be saved is corrupted.
7.1.3 Messages concerning to FUJITSU Scanner Control Center • Failed to start-up the application. Check the setting of FUJITSU Scanner Control Center. • The setting of the path is blank. Check the setting of FUJITSU Scanner Control Center. • Can not find the specified file. Check if the specified path and file name is correct. • Can not find the specified work folder. Check if the specified path is correct. • Cause: The setting of the application may be inadequate.
• • Scanner could not find although it searched again. Check the connection of the scanner and retry again Cause: The scanner power may not have been turned on or the cable may have been connected incorrectly. Otherwise, the OS may not recognize the scanner. User response: Make sure that the scanner power has been turned on and the cable has been connected correctly, then retry rescanning. Or, check if the OS recognizes the scanner.
8. Appendix 8.
Product: M3093DG (device name: fi-4320) Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed, scanner unit moving (flat bed) Automatic Document Feeder (ADF) simultaneous double-sided reading Light source: Xe discharge tube (Green) Basic resolution: Horizontal scanning: 400 dpi Vertical-scanning: 400, 300, 240, 200 dpi Output resolution: Standard: 6001, 400, 300, 240, 200, 150, 100 dpi With image processing option: 50 dpi to 800 dpi (at steps of 1 dpi) Grayscale l
Product: M3096GX1 (device name: fi-4620S) Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed, scanner unit moving (flat bed), Automatic Document Feed (ADF) Light source: Xe discharge tube (Green) Basic resolution: Horizontal scanning: 400 dpi Vertical scanning:400, 300, 240, 200 dpi Output resolution: Standard: 400, 300, 240, 200 dpi With image processing option: 50 dpi to 800 dpi (at steps of 1) Grayscale levels (internal): 8 bit 256 levels Grayscale output:
Product: M3097G1 Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed, scanner unit moving (flat bed), Automatic Document Feed (ADF) Light source: Fluorescent tube (Green) Basic resolution: Horizontal scanning: 400 dpi Vertical scanning:400, 300, 240, 200 dpi Output resolution: Standard: 400, 300, 240, 200 dpi With image processing option: 50 dpi to 1,600 dpi (at steps of 1) Grayscale levels (internal): 8 bit 256 levels Grayscale output: Enabled (8 bits) Some
Product: M3097DG Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed, scanner unit moving (flat bed), Automatic Document Feed (ADF) simultaneous double-sided reading Light source: Xe discharge tube (Green) Basic resolution: Horizontal scanning: 400 dpi Vertical scanning: 400, 300, 240, 200 dpi Output resolution: Standard: 600, 400, 300, 240, 200, 150, 100 dpi With image processing option: 50 dpi to 800 dpi (at steps of 1 dpi) Grayscale levels (internal): 8 bit
Use of FUJITSU Scanner Control Center: Disabled Product: M3099G, M3099GX Type: Desktop Image sensor: Reduced optical system Operating method: Automatic Document Feed (ADF), simultaneous double-sided reading Light source: Fluorescent tube (Green) Basic resolution: Horizontal scanning: 200 dpi Vertical scanning: 400, 300, 240, 200 dpi Output resolution: Standard: 400, 300, 240, 200, dpi With image processing option: 50 dpi to 400 dpi (at steps of 1 dpi) Grayscale levels (internal): 8 bit 256 le
Image processing function: Automatic binary (simple system) With image processing option Outline emphasis, Outline extraction, Automatic separation, Mirror image, Reverse image, Automatic binarization, Smoothing, Filtering, Noise removal Endorser/stamp: With endorser option (Reverse side, minimum left margin printing position of 20 mm)2 Maximum number of characters to be printed: 20 characters Interface: SCSI-II Job control: Enabled Use of FUJITSU Scanner Control Center: Disabled 2.
Product: M3099GH Type: Desktop Image sensor: Reduced optical system Operating method: Automatic Document Feed (ADF), simultaneous double-sided reading Light source: Fluorescent tube (Green) Basic resolution: Horizontal scanning: 200 dpi Vertical scanning: 400, 300, 240, 200 dpi Output resolution: Standard: 400, 300, 240, 200, dpi with image processing option: 50 dpi to 400 dpi (at steps of 1 dpi) Grayscale levels (internal): 8 bit 256 levels Grayscale output: Disabled Halftone Patterns: D
Endorser/stamp: With endorser option (Reverse side, minimum left margin printing position of 20 mm)2 Maximum number of characters to be printed: 20 characters Interface: SCSI-II Job control: Enabled Use of FUJITSU Scanner Control Center: Disabled 2 If 0 mm is specified as the endorser print position, printing will begin 20 mm from the edge of the page.
Product: M4097D (device name: fi-4750) Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed Flat bed, Automatic Document Feed(ADF), simultaneous double-sided reading Long page scanning (297mm x 1387mm) Light source: Xe discharge tube(Green) Basic resolution: Horizontal scanning: 400 dpi Vertical scanning: 800,700,600,500, 400, 300, 240, 200, 150, 100 dpi Output resolution: Standard: 800,700,600, 500,400, 300, 240, 200,150,100 dpi With image processing option: 50 d
Interface: SCSI-II Job control: Enabled Double feed detection: Enabled Long page scanning: Enabled (front side and both sides) Use of FUJITSU Scanner Control Center: Enabled 82
Product: fi-4750C Type: Desktop Image sensor: LED(RGB) + Reduced optical system Operating method: Document fixed Flat bed, Automatic Document Feed(ADF), simultaneous double-sided reading Long page scanning (297mm×1387mm) Light source: LED (R, G, B) Basic resolution: Horizontal scanning: 400 dpi Vertical scanning: 800,700,600,500, 400, 300, 240, 200, 150, 100 dpi Output resolution: Standard: 800,700,600, 500,400, 300, 240, 200,150,100 dpi With image processing option: 50 dpi to 800 dpi (at steps
Image processing function: Automatic binary(simple system), Outline emphasis, Outline extraction, SEE(Selectable Edge Enhancement), De-Screen, Reverse image, With image processing option Automatic binarization, Smoothing, Filtering, Noise removal Interface: SCSI-II Job control: Enabled Double feed detection: Enabled Long page scanning: Enabled (front side and both sides) Use of FUJITSU Scanner Control Center: Enabled 84
Product: M4099D (device name: fi-4990) Type: Desktop Image sensor: Reduced optical system Operating method: Automatic Document Feed (ADF), simultaneous double-sided reading Long page scanning (297mm×878mm) Light source: Fluorescent tube (White) Basic resolution: Horizontal scanning: 400 dpi Vertical scanning: 400, 300, 240, 200 dpi Output resolution: Standard: 400, 300, 240, 200, dpi With image processing option: 50 dpi to 400 dpi (at steps of 1 dpi) Grayscale levels (internal): 10 bit 1024 l
Endorser/stamp: With endorser option (Reverse side, minimum left margin printing position of 20 mm) 2 Maximum number of characters to be printed: 30 characters Interface: SCSI-II Online offset adjustment: Enabled Job control: Enabled Automatic skew compensation: Enabled Drop out: Enabled Double feed detection: Enabled Buffer scan (cache using scanner memory) function: Enabled Blank page skip: Enabled (only when scanner memory is used) Use of FUJITSU Scanner Control Center: Enabled 2 If 0 mm
8.2 Maintenance Service This section explains briefly how you can help us to provide you with high-quality maintenance service. Since it is practically impossible for the Fujitsu service staff to be aware of every detail of your daily scanning operation, please understand that our staff may sometimes be unable to answer your question immediately.
TWAIN Scanner/Driver Utility “Scanner Utility for Microsoft® Windows®” Users Guide 32 bit version First Edition September 2000 All Rights Reserved, Copyright FUJITSU LIMITED 1998, 2000 • • • • The contents of this document may change for improvements without prior notice. Fujitsu takes no responsibilities for infringements of third parties’ patents or other rights that may stem from the use of the data in this document.
