Operation Manual

Troubleshooting and tips
The notebook stops working
NotebookEnergysaving mode
Cause Troubleshooting
Notebook is in energy saving mo
de.
► Leave energy saving mode.
An application programme ha s
caused the
malfunction.
► Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and b a ck
on again).
The battery is dead.
► Charge the battery.
or
► Insert a charged battery.
or
► Connect th e mains adapt
er to the
notebook.
The printer does not print
Printerdoesnot p
rint
Cause Troubleshooting
The printer is not sw itched on. ► Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the p rinter).
The printer is not connected correctly.
► Check that the data cable conn ecting
the notebook to the printer is properly
connected.
The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.
► Check that the data cable conn ecting
the notebook to the printer is properly
connected.
► Check whethe
rthecorrectprinterdriveris
loaded (ref
er to the printer documentation).
The radio connection to a network does not work
Theradi
oconnection toanetwo rkdoesnot work
Cause Troubleshooting
The wireless component is disabled.
► Switch the radio component on (see
"
Switch ing the wireless compone nts on and
off", Page 4 3).
The wireless comp onent is enabled. D esp ite
this, the wireless connection to a network does
not work.
► Check whether the radio connection is
switched on via the software.
► Furthe
r information on using the radio
compo
nent can be found in the help files.
80 Fujitsu Technology Solutions