User's Manual

iPAD Operations Guide
Copyright 2003 by Fujitsu Transaction Solutions Inc. Confidential
23
3 Using the iPAD
3.1 Power on/off (suspend/resume)
3.1.1 Turning on the iPAD (resume mode)
With the power off, press the Power key until the
LED lights in green.
 The iPAD is turned on, the screen light, and the LED goes off.
 Turning on the iPAD for the first time:
The initial installation screen appears when you turn on the iPAD for the first time or you
initialize the system.
See the "iPAD System Users Guide" for information about performing setup.
 Turning on the iPAD after the first time:
The screen that was displayed when you stopped the last time is displayed.
CAUTION
 During resume processing (the green LED
is on), do not remove the main battery or
press the Reset button. Either of these
actions may cause the data in memory to be
lost.
3.1.2 Turning off the iPAD (suspend mode)
With the power on, press the Power key.
 The screen turns black and the iPAD is turned off.
CAUTION
 Do not unlock and remove the main battery
from the iPAD until power has been turned
off. Doing so may cause the data in
memory to be lost.
 Do not turn off the iPAD in the following
state: Data is being backed up or restored.
(The hourglass icon is displayed.)