User's Manual

iPAD Operations Guide

3.4 Adjusting the Brightness of the Front Light

While the iPAD is on, press the [ENT] key while holding down the [SFT] key to bring up the

[Volume and Battery] window. Next, tap [1. Volume and Brightness settings].

(1) In the [Brightness] area, specify the

brightness. Tap the and buttons to select the brightness level. The order of

choices from the left is off, somewhat dark, somewhat bright, and bright.

(2) Tap the [×] button on the window to close it.

⌦ This completes the operation.

For Reference

 The front light automatically goes off if the

remaining battery charge is too low.

3.5 Calibrating the Touch Screen

The coordinates on the touch panel are misaligned if the touch panel does not respond when

you tap the screen and a location different from where you tapped is entered.

If this situation occurs, calibrate the touch panel.

Perform touch screen calibration as follows: While the iPAD is on, press the [ENT] key while

holding down the [SFT] key to bring up the [Volume and Battery] window. Next, tap [2. Touch

Screen Calibration] key on the screen or press the [2] key to bring up the following touch

screen calibration screen.