Server User Manual

- Section Header
operation
Enter the desired operation for the current line. Enter a hyphen ("-") to skip this line.
server_name
Enter the server name (the value of "server_name" in the [Server] section).
spare_server
Enter the physical server name of a server to be assigned as a spare server.
To specify multiple spare servers, separate each server name using semicolons (";"). To remove current spare server settings, enter
"-DELETE".
vlan_switch (optional)
Specify whether VLAN settings or port group settings should be automatically transferred to the spare server when a server
switchover occurs. Enter "ON", "OFF" or a hyphen ("-").
auto_switch (optional)
This value defines whether or not to trigger an automatic switchover upon detection of a server failure. Enter "ON", "OFF" or a
hyphen ("-").
boot_type
Enter the boot type of the server. Enter one of the following.
- SAN boot
"SAN"
- For local boot
"local"
- When using the VIOM server profile to conduct boot settings
Hyphens, ("-")
spare_server_force_off
Enter whether the spare server is turned off forcibly, when switching over to the spare server. Enter "ON", "OFF" or a hyphen
("-").
spare_server_with_vm_guest
Enter whether the server is switched to a VM host on which a VM guest exists. Enter "ON", "OFF" or a hyphen ("-").
VM Management Software Information
-
Section Name
Enter [VMManager] as the section name.
- Section Header
operation
Enter the desired operation for the current line. Enter a hyphen ("-") to skip this line.
name
Enter the name used to identify this VM management software. Enter one of the following.
- When using VMware vCenter Server as VM management software.
"vCenterServer"
- When using System Center Virtual Machine Manager as VM management software.
"SCVMM"
- 358 -