user manual

Connecting the MO Drive to Your Computer

2-3

1. Connect the USB cable (mini-B connector) to

the USB port on your MO drive.

2. Connect the USB cable (A-type connector) to the USB

port on your computer.

Check that the MO Drive is connected correctly

1. Double-click the [My Computer] icon on the desktop.

2. If a removable disk icon appears, the drive has been recognized

successfully.

* If there is no [Removable Disk] icon, disconnect the USB cable from your computer,

wait a few moments and then reconnect it. If the icon still does not appear, refer to the

“Troubleshooting” section.

Note

Once the drivers for this product are successfully installed, the devices listed below are added to the [Device

Manager] window.

Check the Device Manager

Right-click the [My Computer] icon, click [Properties] and then click [Device Manager] to open the Device

Manager window.

* In Windows Me, a white question mark is displayed inside a green circle. This is because the standard Windows Me drivers were

installed. This device will operate properly with these drivers and can be used as is.

OS Location Added Added Device Name

Windows 98

Universal Serial Bus Controllers USB Magneto-Optical Disk Drive (MO Drive)

(including Second Edition)

Disk Drives FUJITSU MCS3130UB-S

Hard Disk Controllers Fujitsu USB-MO Drive

Universal Serial Bus Controllers ?USB HIGH CAPACITY STORAGE

Windows Me

DEVICE*

Disk Drives FUJITSU MCS3130UB-S

Storage Devices USB Disk