user manual

ManualsBrandsFujitsu ManualsComputer DriveComputer Drive IP-9610

Chapter 2 Installation and Connection

IP-9610

USABLE DETACHABLE POWER SUPPLY CABLE SET

MODEL Input Connector Cord Attachment Plug cap

North

America

<*1>

<*2>

100-

120V

IEC C-13

Rated 13A, 125V

UL, CSA Approved

Type SJT, No.16 AWG Min.

3-Conductors

(Single phase;2-current carrying

conductors & ground)

UL, CSA Approved

NEMA (5-15P)

parallel blade

Rated 13A, 125V

UL, CSA Approved

200-

240V

IEC C-13

Rated 15A, 250V

UL, CSA Approved

Type SJT, No.14 AWG Min.

3-Conductors

(Single phase; 2-current carrying

conductors & ground)

UL, CSA Approved

NEMA (6-15P)

tandem blade

Rated 15 A, 250 V

UL, CSA Approved

Europe

<*2>

100-

240V

IEC C-13

Rated 10A, 250V

<*1>

CENELEC OC

3X1.0 square mm<*1>

<HAR>

Rated 10 A, 250 V

<*1>

Aus-

tralia

100-

240V

IEC C-13

Rated 10A,

250V

Cable: AS OD 3 X1.0 square mm

e.g.

Rated 10 A, 250 V

U.K

<*2>

100-

240V

IEC C-13

Rated 10A,

250V

BS OC 3 X1.00 square mm Rated 10 A. 250 V

IEC C-13

Rated 13A,

125V

Type HVCTF cross section area

1.25 square mm

3-Conductors

(Single phase;2-current

carrying conductors & ground)

NEMA (5-15P)

parallel blade

Rated 13 A, 125 V

Japan

100V

METI Approved

or <PSE>

METI Approved

or <PSE>

METI Approved

or <PSE>

220V

(Class I)

IEC 60320-1

(IEC C-13)

Rated 12A, 250V

Comply with KSC3304.

Type VCTF cross section area 1.25

(0.50 or 1.00 or 2.00) square mm

3-Conductors

(Single phase;2-current

carrying conductors & ground)

Comply with KSC8305.

Rated 12A, 250V

Korea

220V

(Class II)

IEC 60320-1

(IEC C-13)

Rated 3A, 250V

Comply with KSC3304.

Type VCTFK cross section area

1.25 (0.50 or 0.75 or 1.00 or 2.00)

square mm

2-Conductors

Comply with KSC8305.

Rated 12A, 250V

Note: *l. Be sure that the detachable proper Supply cord has the approval of the

appropriate safety agencies of the country where the equipment will be used.

*2. Cable length of above Power Supply cord shall be shorter than 4.5 m.

ASA