User guide

C-29
Command
Sets
User's Manual
COMMAND SETS
Function Command
Bit Image Graphics
Graphics type m graphics ESC * (m) (n
1
) (n
2
)
(data)
Bit image mode definition ESC ? (s) (n)
Single-density graphics ESC K (n
1
) (n
2
) (data)
Double-density graphics ESC L (n
1
) (n
2
) (data)
High-speed double-density graphics ESC Y (n
1
) (n
2
) (data)
Quadruple-density graphics ESC Z (n
1
) (n
2
) (data)
Select raster image graphics ESC ( G (n
1
) (n
2
) (d)
n
1
= 1, n
2
= 0
d = 1: Raster image graphics mode
Print raster image graphics ESC . (c)
(v) (h) (m)
(n
1
) (n
2
) (data)
Cut Sheet Feeder Control
Feed a sheet from bin 1 ESC EM 1
Feed a sheet from bin 2 ESC EM 2
Feed a sheet from bin 3 * ESC EM E
Eject a page from the printer ESC EM R
Select bin 1 for following pages * //1//
Select bin 2 for following pages * //2//
Select bin 3 for following pages * //E//
Eject sheet at end of current page * //R//
Change bins at next page * //C//
Cut sheet feed selection * //S//
Miscellaneous
Sound the bell BEL
Move print head to home position ESC <
Unidirectional printing on/off ESC U (n)
(on: n = 1, off: n = 0)
Initialize printer ESC @
Enter online setup mode * ESC e ONLINE
(data)
* Indicates extended commands not supported by the original
printer.
#C Appendix C 2000.09.20, 2:48 PM29