Printer User's Manual

Using Setup Mode

8-4 User’s Manual

Entering setup mode prints the <<FUNCTION>> menu.

Table 8-1 summarizes the setup mode functions.

To select a function from the <<FUNCTION>> menu, do the

following:

1. Repeatedly press LOCK to position the yellow arrow on the print

head beneath the required function.

2. Press FONT or MENU to select a function. If the function has

items and options, the printer prints the first item and its options.

<<FUNCTION>>

SAVE&END MENU1 MENU2 HARDWRE ADJUST CONFIG DEFAULT LIST SELF-TST HEX-DUMP

V-ALMNT GAP-ADJ

Table 8–1 Setup mode functions

Function Purpose

SAVE&END Exits setup mode and saves changes made in

setup mode.

MENU1 and

MENU2

Assigns print features to MENU1 and

MENU2 on the control panel.

HARDWRE Changes hardware options.

ADJUST Changes print adjustment options.

CONFIG Changes conﬁguration options.

GAP-ADJ Sets the head gap, and is displayed when the

printer is equipped with the APTC function.

DEFAULT Resets MENU1 and MENU2 default values

set at shipment.

LIST Prints all currently selected options.

SELF-TST Run the self-test.

HEX-DUMP Prints hexadecimal data dumps.

V-ALMNT Checks and corrects vertical printing

alignment.

Using Setup

Mode

(GAP-ADJ is printed only with APTC installed.)

DL6400/6600 Book Page 4 Thursday, September 21, 2000 7:52 PM