Computer Drive User Manual

Chapter 5 Configuration Menu

> 5.2 RAID Management

ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance

161

P2X0-0760-02ENZ0

4 When adding disks to the RAID Group, select the checkboxes of the disks that

are to be used, and click the [Set] button.

To remove disks from the RAID Group, deselect the checkboxes of the disks that

are no longer required, and click the [Set] button.

Only disks that can be used will have checkboxes.

Only blue LED disks(*1) can be added, and only green LED disks(*2) can be deleted.

*1: Disk not currently assigned to any RAID Group or REC Disk Buffer.

*2: Disk assigned to the RAID Group before the LDE.

Click the [Move] button to display the Expansion Rack screen. Select the Expansion Rack

disks using the same procedure as for the Base Rack

→ The [Logical Device Expansion (Setting Check)] screen appears.

Check the following when select the disks.