Computer Drive User Manual

Chapter 5 Configuration Menu
> 5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
168
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
■ The supported volume types for each device type
The following table shows supported volume types for each device type.
OK: Supported
–: Not supported
■ The maximum number of volumes for each RAID Group
The following table shows the maximum number of volumes that can be created in a given RAID
Group, as determined by the types of volumes and disk drives involved.
● For Open Volumes:
*1: "200GB (SSD)" and "400GB (SSD)" are Solid State Drives.
*2: "500GB (S)", "750GB (S)", "1TB (S)", and "2TB (S)" are Nearline SATA disk drives.
● For Mainframe Volumes:
*1: "73GB (SSD)", "146GB (SSD)" , and "200GB (SSD)" are Solid State Drives.
Volume type
Device type
ETERNUS DX400 series ETERNUS DX8000 series
Open, SDV, SDPV, TPV OK OK
Mainframe
(F6427G, F6427H, F6427K)
–OK
MVV
(MVV (G), MVV (H), MVV (K))
–OK
Volume types
Disk drive type
200GB
(SSD)
(*1)
400GB
(SSD)
(*1)
300GB 450GB 600GB
500GB
(S)
(*2)
750GB
(S)
(*2)
1TB
(S)
(*2)
2TB
(S)
(*2)
Open + SDV +
SDPV + TPV
128 128 128 128 128 128 128 128 128
Volume types
Disk drive type
73GB
(SSD)
(*1)
146GB
(SSD)
(*1)
200GB
(SSD)
(*1)
36GB 73GB 146GB 300GB
Mainframe (F6427G) + MVV (G) 48 96 128 24 48 96 128
Mainframe (F6427H) + MVV (H) 32 64 101 16 32 64 128
Mainframe (F6427K) + MVV (K)24486712244896