Computer Drive User Manual

Chapter 5 Configuration Menu

> 5.4 Host Interface Management

ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance

308

P2X0-0760-02ENZ0

■ For FC-RA detailed settings

(1)Select the following items and click the [Set] button.

- Connection Topology

Select a connection topology for the FC-CA Port.

Select either Fabric Connection or FC-AL Connection.

When [FC-AL Connection] is selected, it is necessary to assign a Loop-ID to the FC-

CA Port.

- Transfer Rate

Select a transfer rate for the FC-RA Port from the list box.

→ The [Set CA Parameters (FC-RA Detailed Setting Check)] screen appears.

(2)Click the [OK] button.

→ The [Set CA Parameters (Updating Configuration Information)] screen appears.

When the process is successfully completed, the [Set CA Parameters (FC-RA

Detailed Settings Result)] screen appears.

(3)Click the [OK] button.

→ Returns to the [Set CA Parameters (Initial)] screen.