Computer Drive User Manual

Chapter 5 Volume Management

5.2 Functions in the Action Area for Volume

ETERNUS Web GUI User’s Guide

130

• Select Destination Migration

Specify the destination RAID group, the TPP, or the FTRP with the radio button. The RAID groups,

TPPs, or FTRPs that can be used for migration are displayed (this is determined by the volume

capacity and the encryption status).

→ A confirmation screen appears.

3 Click the [OK] button.

→ Migration starts.

4 Click the [Done] button to return to the [Volume] screen.

End of procedure

• If the migration source is an ODX Buffer volume, select "RAID Group / Thin Provisioning Pool /

Flexible Tier Pool" for "Destination Migration".

• An error screen appears in the following conditions:

- When the "Volume Capacity" is not input

- When "Volume Capacity" does not satisfy the input conditions

- When "Enable" is selected for "Start Zero Reclamation after migration" while Zero Reclamation

is being performed in a migration source volume

- When the migration source is an ODX Buffer volume and "Enable" is selected for "Start Zero

Reclamation after migration"