Computer Drive User Manual

Chapter 8 Advanced Copy Management
8.1 Advanced Copy Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
286
• Detail Information
Detailed information about the copy path is displayed.
If an error occurs in the copy path, the error details or location is displayed using the following
abbreviations. If there are multiple error locations, multiple abbreviations are displayed.
- Connectable
The copy path is in normal status.
- Path Unstable
The copy path between the local device and remote device is in unstable status. For example, link-
down repeatedly occurs in a certain period of time or communication fails.
- Bitmap Resolution Mismatched
The resolution settings are different between the local and remote devices.
- Suspected Spot (D)
The copy path settings may be invalid.
- Suspected Spot (N)
The error occurs in the remote device.
- Suspected Spot (T)
The error occurs in the FC-RA port or iSCSI-RA port on the remote device.
- Suspected Spot (C)
The error occurs in the cable.
- Suspected Spot (O)
The error occurs in an adapter that is not for a local or a remote device. This occurs only when the
connection type is FC-AL.
- Suspected Spot (S)
The error occurs in the switch or switch settings.
- Suspected Spot (I)
The error occurs in the FC-RA port or iSCSI-RA port on the local device.
- Suspected Spot (M)
The error occurs in the memory.