Computer Drive User Manual

Chapter 9 Connectivity Management

9.2 Functions in the Action Area for Connectivity

ETERNUS Web GUI User’s Guide

421

11 Click the [OK] button.

→ The host affinity creation starts.

12 Click the [Done] button to return to the [Connectivity] screen.

End of procedure

■ When "Host - CA Port" is selected for "Target Connection"

The procedure to create a host affinity is as follows:

Procedure

1 Click [Create Host Affinity] in [Action].

An error screen appears in the following conditions:

• When the host interface type of the host group and the CA type of the CA port group do not match

Note that the CA types of "FCoE" and "FC" are regarded as the same CA type.

• When the number of host affinities exceeds the maximum number per ETERNUS DX Disk storage

system

• When the number of hosts exceeds the maximum number per CA port

• When a host cannot recognize some LUNs