Computer Drive User Manual

Chapter 9 Connectivity Management

9.2 Functions in the Action Area for Connectivity

ETERNUS Web GUI User’s Guide

500

2 Add a host in the ETERNUS DX Disk storage system in the following procedures.

■ When registering a host by selecting from the host list

(1) Click the [Now Connected] tab.

(2) Select the host that is to be registered from the SAS host list, input the SAS host information, and

click the [Add] button.

- Checkbox to select a host

Select the checkbox of the SAS host that is to be registered in the ETERNUS DX Disk storage

system. The host name and host response can only be specified for the selected SAS host.

- Name

Input the name for the SAS host.

The following input conditions apply:

• Up to 16 alphanumeric characters and symbols (except ", (comma)" and "?")

• Space

- Host Response

Select a host response to be assigned to a host.

The host response list created in the ETERNUS DX Disk storage system is displayed.

• Solaris MPxIO

• HP-UX

• AIX EMPD (*1)

• AIX VxVM

• AIX Single Path

• VS850/SVC

• Host responses created in the ETERNUS DX Disk storage system

• Default

*1: EMPD: ETERNUS Multipath Driver

→ A confirmation screen appears.

Filter Setting

Filter Description

SAS Address

Input the SAS address that is to be displayed.

SAS hosts matching or partially matching the entered SAS address are displayed.

When not using the SAS address for filtering, leave this item blank.