Computer Drive User Manual

Chapter 10 Component Management

10.1 Component Status

ETERNUS Web GUI User’s Guide

655

The following items are displayed in the Main area:

• Device image

The rear view or front view of the CE that is installed in the ETERNUS DX Disk storage system is displayed.

For the ETERNUS DX80 S2/DX90 S2, the ETERNUS DX410 S2/DX440 S2, or the ETERNUS DX8100 S2, the rear

view is displayed.

For the ETERNUS DX8700 S2, the front view is displayed.

Components that are not CMs are grayed out.

The CM status is displayed with an icon. Refer to "B.5 Component Status" (page 977)

for display items.

When using the ETERNUS DX8100 S2/DX8700 S2, clicking the BUD number displays the [Boot and Utility

Device] screen. Refer to "10.1.19 Boot and Utility Device Detail" (page 679)

for display items.

When using the ETERNUS DX8700 S2, clicking the CA number displays the [Channel Adapter] screen. Refer

to "10.1.6 Channel Adapter Detail" (page 655)

for display items.

10.1.6 Channel Adapter Detail

The detailed information for the Channel Adapter is displayed.

■ Summary

The following items are displayed in the Main area:

• Location

The CA installation location is displayed.

• CA Type

The CA type is displayed.

The display items in this field vary depending on the storage system model.

- For ETERNUS DX80 S2/DX90 S2

• 8G-FC 2port

• 16G-FC 2port

• 10G-iSCSI 2port

• 1G-iSCSI 2port

• 6G-SAS 2port

• 10G-FCoE 2port