Computer Drive User Manual

Chapter 11 System Management
11.1 System Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
713
11.1.2 Network
This function displays the network environment of each port in the ETERNUS DX Disk storage system.
■ Basic
The network environment of each port, the SNMP information registered in the ETERNUS DX Disk storage
system, and the E-mail information are displayed.
The following items are displayed in the Main area:
• Port
The port type is displayed.
- For ETERNUS DX80 S2/DX90 S2: MNT or RMT
- ETERNUS DX410 S2/DX440 S2: MNT, RMT, or FST
- For ETERNUS DX8100 S2/DX8700 S2: MNT, RMT, or FST
• Speed and Duplex
The transfer speed and the communication method are displayed.
- Auto-negotiation
- 1Gbit/s
- 100Mbit/s Half
- 100Mbit/s Full
- 10Mbit/s Half
- 10Mbit/s Full
Click the [ ] icon to display the latest screen. Note that after changing the firewall setting and returning to
this screen, it takes approximately 10 seconds to update the display contents. Wait at least 10 seconds and
click the [ ] icon or click [Network] in the category to display the [Network] screen again.