Computer Drive User Manual

Chapter 11 System Management

11.2 Functions in the Action Area for System

ETERNUS Web GUI User’s Guide

772

The procedure to set the SNMP Agent community is as follows:

Procedure

1 Click [Setup SNMP Community] in [Action].

2 Click the [Add] button.

3 Input or edit the community, and click the [OK] button.

• Community Name

Input the community name to be used when accessing a MIB or sending a trap.

The community name which has already been used cannot be entered.

The following input conditions apply:

- Up to 32 alphanumeric characters and symbols

- "! (exclamation mark)", "# (hash mark)", "& (ampersand)", "_ (underscore)", "+ (plus)", "-

(hyphen)", "* (asterisk)" and "/ (slash)" can be used

- Spaces

• View Name

Select the view name to specify the MIB access range for the community.

A "blank" means accessing the MIB is not allowed.

The SNMP Managers which are allowed to access, and the MIB access range, can be specified for each

community.

Click the [Community Name] link to edit the existing community information.