Computer Drive User Manual

Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
888
3 Click the [OK] button.
→ Setting of the event notification starts.
4 Click the [Done] button to return to the [Event/Dump] screen.
End of procedure
System Defaults
The initial state of event notification is as follows:
Selected: Notify
Cleared: Not notify
Selected/Cleared: Some events are notified and other events are not notified
–: Not applicable to notification
Item Notification method
Host Sense Key
Code Qualifier
SNMP Trap E-Mail syslog REMCS AIS
Connect
All Error Events Selected/
Cleared
Selected/
Cleared
Selected/
Cleared
Cleared Selected/
Cleared
Selected/
Cleared
All Warning Events Selected Selected Selected Cleared – Selected
All Informational Events – Selected/
Cleared
Selected/
Cleared
Cleared – Selected/
Cleared
Individual Settings
within Severity Level
Yes Yes Yes No Yes Yes
Event Notification Remarks
Blink Fault LED at warning Enable
Turn on Fault LED when redundant copy is completed Disable
Display parts (except disk) with error status on LCD Enable This setting is available only when
using the ETERNUS DX8700 S2.
Display parts (except disk) with warning status on LCD Enable
Display disks with error status on LCD Any Time Enable
when HS<0 Disable
Display disks with warning status on LCD Any Time Enable
when HS<0 Disable