Operating Manual FUJITSU Tablet STYLISTIC Q616 System
Contact address in North America FUJITSU AMERICA INC. 1250 East Arques Avenue, Sunnyvale, CA 94085-3470, U.S.A. Telephone: 800 831 3183 or 408 746 6000 "http://solutions.us.fujitsu.com" "http://solutions.us.fujitsu.com/contact" Have a question? Email us at: "AskFujitsu@us.fujitsu.com" Copyright © 2 0 1 5 F ujitsu America, Inc.
FUJITSU Tablet STYLISTIC Q616 Operating Manual Declarations of conformity 7 Fujitsu Contact Information 8 Ports and controls 10 Important notes 13 First-time setup of your device 18 Working with the Tablet PC 22 Accessories for your Tablet PC (optional) 45 Security functions 57 Connecting external devices 64 Settings in BIOS Setup Utility 68 Troubleshooting and tips 71 Technical data 81 Manufacturer’s notes 86 Declarations of conformity 89 FCC and IC Regulatory Information 90
Copyright and Trademark Information Fujitsu America, Incorporated has made every effort to ensure the accuracy and completeness of this document; however, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes.
Contents Contents Declarations of conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Fujitsu Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 9 Ports and controls . . . . . .
Contents Inserting the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Removing the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inserting a SIM card . . . . . . . . . . . . . . .
Contents Settings in BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Starting the BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BIOS Setup Utility operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Exiting BIOS Setup Utility . . . . . . . . . . . . . .
Contents Declarations of conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 FCC and IC Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Regulatory Notes and Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wireless LAN, Health and Authorization for use . . . . . . . . . .
Declarations of conformity Declarations of conformity DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name: Address: Telephone: Declares that product: Fujitsu America, Inc. 1250 E. Arques Avenue Sunnyvale, CA 94085 (408) 746-6000 Base Model Configuration: STYLISTIC Q616 Complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference.
Fujitsu Contact Information Fujitsu Contact Information Service and Support You can contact Fujitsu Service and Support in the following ways: • • Toll free phone: 1-800-8Fujitsu (1-800-838-5487) Website: "http://solutions.us.fujitsu.com/www/content/support/contact/index.
Fujitsu Contact Information Notational conventions Pay particular attention to text marked with this symbol. Failure to observe this warning will endanger your life, will damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective through failure to observe these warnings. Indicates important information which is required to use the device properly.
Ports and controls Ports and controls This chapter presents the individual hardware components of your device. It gives an overview of the indicators and connections of the device. Please familiarize yourself with these items before you start to work with the device.
Ports and controls Left side 1 2 5 4 3 1 = Tether eyelet for stylus tether 2 = Combined microphone / Line-in / Headphone / Line-out / Headset port 3 = Storage card slot 4 = SIM card slot 5 6 7 8 = = = = 6 7 8 Status indicators Micro-HDMI port Speaker DC jack (DC IN) Right side 1 1 2 3 4 5 = = = = = 2 Security Lock device Speaker Shortcut button Decrease volume button Increase volume button Fujitsu 3 4 5 6 7 6 7 8 9 10 = = = = = 8 9 10 ON/OFF button USB port (USB 2.
Ports and controls Back 1 2 3 4 5 6 1 2 3 4 12 = = = = Webcam LED Webcam Camera light Fingerprint sensor 5 = NFC (Near Field Communication) (device-dependent) 6 = SmartCard reader (device dependent) Fujitsu
Important notes Important notes Notes Importantnotes This chapter contains essential safety information which must be followed when working with your Tablet PC. The other notes provide useful information about your Tablet PC. Safety instructions Information, Safetyinformation Please follow the safety notes provided in the "Safety/Regulations" manual as well as the safety notes given below. Please pay special attention to the sections in the manual marked with the symbol on the left.
Important notes Additional safety notes for devices with wireless components Wireless LAN Bluetooth,Safetynotes components If a wireless component (Wireless LAN, Bluetooth, 4G) is integrated in your Tablet PC, you must be sure to observe the following safety precautions when using your Tablet PC: • • • Switch off the wireless components when you are in an aircraft or driving in a car. Switch off the wireless components when you are in a hospital, an operating room or near a medical electronics system.
Important notes Traveling with your Tablet PC Mobile operation TabletPC Transportation Notes Please follow the instructions below when traveling with your Tablet PC. Before you travel ► Back up important data stored on your hard disk. ► Switch off the wireless component for data security reasons. With data traffic via a wireless connection, it is also possible for unauthorized third parties to receive data.
Important notes Transporting the Tablet PC Protect the Tablet PC from severe shocks and extreme temperatures (e.g. direct sunlight in a car). • • • ► ► ► ► Do not transport your Tablet PC while it is turned on. Carry your Tablet PC with you while traveling. Do not check it in as baggage. Never put your Tablet PC through a metal detector. Have it hand-inspected by security personnel. You can however put your Tablet PC through a properly tuned X-ray machine.
Important notes Cleaning with disinfectant wipes There are many ways of disinfecting surfaces.
First-time setup of your device First-time setup of your device Gettingstarted First-timesetup Please read the chapter "Important notes", Page 13. If your device is equipped with a Windows operating system, the necessary hardware drivers and supplied software are already pre-installed. Before switching it on for the first time, connect the device to the AC voltage using the AC adapter, see "Connecting the AC adapter", Page 19.
First-time setup of your device Choose a location ACadapter Setup Choosealocation Choose a suitable location for the device before setting it up. In doing so, please follow these instructions: • Never place the device or the AC adapter on a heat-sensitive surface. The surface could be damaged as a result. Never place the device on a soft surface (e.g. carpeting, upholstered furniture, bed). This can result in damage caused by overheating. The back of the device heats up during normal operation.
First-time setup of your device Switching on the device for the first time Switchingon for thefirsttime To make it easier to use your device for the first time, the operating system is pre-installed on the hard disk. 1 2 2 ► Press the ON/OFF button (1) for about one second to switch the device on. The power-on indicators (2) light up whenever the system is switched on. ► During the installation process, follow the on-screen instructions.
First-time setup of your device Installing Bonus Apps BonusApps After you have started your system the first time, you will see a Bonus Apps icon on your desktop. ► Click on the icon to see which additional applications are available for you to install. Applications that are already installed appear in grey, those that are available for installation appear in blue. ► Select the applications you wish to install by selecting the checkbox adjacent to your selection.
Working with the Tablet PC Working with the Tablet PC Tablet Tablet,operation This chapter describes the basics for operating your Tablet PC. You can find instructions on how to connect external devices (e.g. mouse, flash storage) to the Tablet PC in the chapter "Connecting external devices", Page 64. Please refer to the notes in the chapter "Important notes", Page 13.
Working with the Tablet PC No. 1 2 3 Fujitsu Status indicator Description Power-on indicator • The indicator lights up white: The Tablet PC is switched on. • The indicator flashes: The Tablet PC is in sleep mode (Save-to-RAM). • The indicator is not lit up: The Tablet PC is switched off or in Save-to-Disk mode. Battery charging indicator • The indicator lights up orange: The rechargeable battery is charging.
Working with the Tablet PC Switching the Tablet PC on Tablet:Switching on Suspend/Resumebutton Power-onPower-onindicator 1 2 2 ► Press the ON/OFF button (1) for about one second to switch the device on. The power-on indicators (2) light up whenever the system is switched on. Programing the ON/OFF button You can program the ON/OFF button: Operating system Windows 7 Windows 8.1 Menu Start - (Settings) - Control Panel - System and Security - Power Options Windows 8.
Working with the Tablet PC Switching the Tablet PC off Back up your data and close all applications before you switch off your device. Otherwise data might be lost. ► Shut down the operating system correctly. ► If the Tablet PC does not switch itself off automatically, press the ON/OFF button for approx. five seconds. Switchingoffthe Handwriting recognition For detailed information on handwriting recognition, see the documentation for your operating system.
Working with the Tablet PC Touchscreen Notes Touchscreen High-quality LCD screens (TFT) are installed in Fujitsu Tablet PCs. For technical reasons, these screens are manufactured for a specific resolution. An optimal, clear picture can only be ensured in the resolution intended for the particular screen. A screen resolution which differs from the specification can result in an unclear picture. The screen resolution of your Tablet PC’s touchscreen is optimally set at the factory.
Working with the Tablet PC Select display orientation (portrait or landscape format) Displayorientation Portraitformat Landscapeformat You can choose to use either portrait or landscape format for the display. Windows 7 You can change these settings in the Fujitsu menu or under Start - (Settings -) Control Panel - Hardware and Sound - Display - Settings. Windows 8.1 You can change these settings under Windows 8.1 Desktop - Control Panel Hardware and Sound - Windows Mobility Center / Rotate screen.
Working with the Tablet PC Actions with one finger (Windows 8.1 Modern) Action Wipe your finger over the screen from the right-hand edge. Description ► Open Charms with system commands (equivalent to pressing the Windows button + C button on a keyboard). ► Working with the mouse: Position the mouse pointer at the bottom right-hand edge of the screen. Wipe your finger over the screen from the left-hand edge.
Working with the Tablet PC Action Press and hold Description ► Keep your finger pressed on an object on the screen to display a menu with further options. ► Working with the mouse: Move the mouse pointer over the object to display a menu with further options. Tap on an object ► Tap your finger on an object on the screen to open an App or a link or to execute a command. ► Working with the mouse: Left-click on the object.
Working with the Tablet PC Actions with one finger (Windows 7 / Windows 8.1 Desktop) Action Selecting objects (click with the left mouse button) Starting programs (double-click with the left mouse button) Moving objects/windows (while holding the left mouse button pressed, drag & drop) Opening a context menu (click with the right mouse button) Moving the cursor 30 Description ► Tap once briefly with the finger on the object. ► Use one finger to tap twice in quick succession on the program symbol.
Working with the Tablet PC Actions with two fingers (Windows 7 / Windows 8.1 Desktop) Action Scrolling Description ► Place two fingers on the touchscreen. ► Move the fingers up to scroll up. or ► Move the fingers down to scroll down. Rotating ► Position your thumb on the touchscreen and rotate the image clockwise or counter-clockwise using your index finger.
Working with the Tablet PC Action Increase or decrease view Description ► Put two fingers on the touch screen and move them apart to increase the size of the view. or Lock context-sensitive menus 32 ► Put two fingers on the touch screen and move them together to decrease the size of the view. ► Use two fingers to tap twice in quick succession on the touchscreen.
Working with the Tablet PC Using the stylus Pen 1 = stylus tip 3 2 = stylus button (right mouse button) 3 = eyelet for optional stylus tether 2 1 You can use the stylus on your Tablet PC as an electronic writing tool, to select menu items and to navigate through the programs. Programs that support handwriting recognition also allow you to write directly on the screen with the stylus. You can also use the stylus as a drawing tool.
Working with the Tablet PC Delete functions are not supported by the stylus. Action Mouse Selecting menu Click with the left mouse button. items Starting programs Double-click with the left mouse button. Moving an object Drag with the left mouse button or window pressed. Opening a context Click with the right mouse button. menu Moving the cursor Move the mouse Stylus Tap on the menu entry with the tip of the stylus. Tap on the program symbol twice in rapid succession using the stylus tip.
Working with the Tablet PC Calibrating the stylus Before first use with the stylus, you must calibrate your Tablet PC via the operating system, so that it recognizes the stylus as accurately as possible. You should also always repeat the calibration if the coordination between the stylus and the cursor movement deteriorates. Operating system Windows 7 / Windows 8.1 Desktop Menu To calibrate, run the Hardware and Sound / Tablet PC Settings function in the Control Panel.
Working with the Tablet PC Tablet buttons In addition to an on/off switch (4), your Tablet PC is fitted with three tablet buttons. 1 No. 1 2 3 Description Shortcut button Decrease volume button Increase volume button 2 3 4 Functions Start function manager or screen shot function Decrease volume Increase volume If the Tablet PC’s Windows button is pressed in combination with the ON/OFF button (4), this function is equivalent to pressing the Ctrl + Alt + Del key combination on a keyboard.
Working with the Tablet PC Webcam Webcam Your device has two webcams: one on the front of the device and one on the rear. The webcam has its own status indicator. The indicator lights up when the webcam is active. Depending on the software used, you can use your webcam to take pictures, record video clips or take part in web chats. • • • • The picture quality depends on the lighting conditions and the software being used. You can only operate the webcam with a particular application (e.g.
Working with the Tablet PC Using the energy saving functions Battery Energy The Tablet PC uses less power when the energy saving features are enabled. You will then be able to work longer when using the battery before having to recharge it. The energy efficiency is increased and environmental pollution is reduced. By choosing the best power options, you can make significant savings and at the same time help protect the environment.
Working with the Tablet PC Memory cards Slot Your Tablet PC is equipped with an integrated storage card reader. Use storage cards to enlarge the storage of your Tablet PC. Follow the manufacturer’s instructions when handling the memory cards. Memory card Supported formats The following formats are supported: • • • Micro Secure Digital (Micro SDTM Card) Micro SDHC Micro SDXC Inserting the memory card 2 1 ► Open the slot cover (1). ► Carefully slide the storage card into the slot (2).
Working with the Tablet PC Removing the memory card Memorycard To avoid any loss of data, always follow the correct procedure for removing the card (see the documentation for your operating system). ► Open the slot cover. a 1 1 2 3 ► Press the edge of the memory card so that the memory card jumps (1) slightly out of the slot (a). ► Pull the memory card out of the slot (a) in the direction of the arrow (2). ► Close the slot cover (3).
Working with the Tablet PC SIM card A SIM Card (Subscriber Identity Module) is a chip card which is inserted in a cellular phone or Tablet PC and, together with an integrated 4G module, enables access to a cellular radio network. Follow the instructions supplied by the provider of the SIM card. If you do not feel the the SIM card engage as you insert it, use a pointed object to insert the SIM card. Please note that the SIM card format must be micro-SIM (3FF).
Working with the Tablet PC Removing a SIM card ► Open the slot cover. 1 a 2 3 ► Press the edge of the SIM card so that the SIM card jumps slightly out of the slot (1). ► Pull the SIM card out of the slot (a) in the direction of the arrow (2). ► Close the slot cover (3). Wireless LAN/Bluetooth/4G/LTE/NFC wireless components The installation of wireless components not approved by Fujitsu will invalidate the certifications issued for this device.
Working with the Tablet PC Further information on WLAN and Bluetooth For further information about WLAN or Bluetooth, please refer to the appendix of this Operating Manual. For WLAN specifications, see chapter "WLAN specifications", Page 83. Access via UMTS If you ordered an integrated UMTS module with your system, you can enjoy optimum reception and maximum energy efficiency without awkward cables or antennas. The optional UMTS module is ready for use immediately.
Working with the Tablet PC Ethernet and LAN (only with performance docking cradle) EthernetLAN The internal network module of your Tablet PC supports Ethernet LAN. You can use it to establish a connection to a local network (LAN = Local Area Network). ► Connect the network cable to the LAN port of the performance docking cradle (1). ► Connect the network cable to your network connection (2). 1 2 Your network administrator can help you to configure and use the LAN connections.
Accessories for your Tablet PC (optional) Accessories for your Tablet PC (optional) The following accessories are available for your Tablet PC: • Performance docking cradle for charging the Tablet PC and with additional ports • Keyboard cover • Shoulder strap • Folio case • Protective TPU cover with kickstand and handstrap The following sections provide more information on handling the accessories.
Accessories for your Tablet PC (optional) Your performance docking cradle (optional) As well as fast charging, your performance docking cradle is a device that also allows you to quickly connect your Tablet PC to your peripherals such as a monitor, keyboard, mouse, etc. You only need to dock the Tablet PC to be able to work with your peripheral devices. Cradle components Cradle Ports 1 5 6 7 2 3 1 2 3 4 5 6 = = = = = = Dock release button Docking port USB port 3.0 USB port 3.0 USB port 3.
Accessories for your Tablet PC (optional) Connecting the Tablet PC to the cradle It is possible to connect the Tablet PC to the cradle while it is running. Disconnect the AC adapter from the Tablet PC before connecting the Tablet PC to the cradle. When the Tablet PC is connected to the cradle, you must connect the AC adapter to the cradle. Cradle ► Remove the AC plug of the AC adapter from the power outlet. ► Remove the AC adapter cable from the DC jack (DC IN) of the Tablet PC.
Accessories for your Tablet PC (optional) ► Push the Tablet PC onto the cradle in the direction of the arrow (1) until you feel it engage on the connector and until the slide-out position returns to its original position. ► Plug the AC adapter cable into the DC jack (DC IN) on the cradle (2). ► Connect the AC cable to the AC adapter (3). ► Plug the AC cable into the power outlet (4). Disconnecting the Tablet PC from the cradle It is possible to separate the Tablet PC from the cradle while it is running.
Accessories for your Tablet PC (optional) Keyboard cover (optional) The keyboard cover is an optimized device for the convenient input of text. It only needs to be docked with the Tablet PC.
Accessories for your Tablet PC (optional) Connecting the Tablet PC to the keyboard cover If the Tablet PC is connected to the keyboard cover, you can connect the AC adapter to the Tablet PC. Keyboardcover ► Position the keyboard cover as shown. 2 1 4 3 ► Push the Tablet PC onto the keyboard cover in the direction of the arrow (1) until you feel it engage with the plug. ► Connect the AC adapter cable to the DC input connector (DC IN) of the Tablet PC (2). ► Connect the AC cable to the AC adapter (3).
Accessories for your Tablet PC (optional) Separating the Tablet PC from the keyboard cover It is possible to separate the Tablet PC from the keyboard cover while it is running. However, to prevent any problems, we recommend that you execute the appropriate undocking function provided by the operating system. 2 1 ► Press the slide-out button down (1) until it remains in the pressed position (red marking visible). ► Lift the Tablet PC away from the keyboard cover in the direction of the arrow (2).
Accessories for your Tablet PC (optional) Folio case (optional) If you are using the folio case, do not connect the Tablet PC to the keyboard cover. Please note that the device cannot be placed into the docking station in clamshell mode if the tablet still has its cover on. • • • • • • This folio case contains magnets. Keep it away from objects that may be easily affected by the influence of magnetism, e.g. pacemakers and magnetic cards.
Accessories for your Tablet PC (optional) Fujitsu 53
Accessories for your Tablet PC (optional) Protective TPU cover with kickstand and handstrap (optional) If you are using the Protective TPU cover with kickstand and handstrap, open the TPU cover as illustrated below to connect the Tablet PC to the keyboard cover or cradle. • • • • • Please note that the LCD screen may be accidentally turned on when touched if the device is in its TPU cover. Make sure the device is fitted into the TPU cover properly in order to prevent it from falling out.
Accessories for your Tablet PC (optional) 2 b a ► Push the Tablet PC into the TPU cover as shown (2). Ensure that the Tablet PC faces the TPU cover in the right direction, i.e., that the Windows button (a) and the webcam (b) are in the locations shown, relative to the TPU cover. 3 ► Close the TPU cover (3).
Accessories for your Tablet PC (optional) The following illustration shows you the way in which the TPU cover can be used: 56 Fujitsu
Security functions Security functions Securityfunctions Your Tablet PC has several security features that you can use to secure your system and your personal data from unauthorized access. This chapter explains how to use these functions, and what the benefits are. Please remember that in some cases, for example, forgetting your password, you may be locked out of the system and unable to access your data.
Security functions Using the Security Lock Anti-theftprotection SecurityLock Your device comes with a Security Lock device for the Kensington Lock Cable. With the Kensington Lock Cable, a sturdy steel cable, you can protect your device and the port replicator against theft. The Kensington Lock Cable is available as an accessory. ► Fit the Kensington Lock Cable to the corresponding mechanism on your device. Attach another Kensington Lock Cable to your cradle to protect this from theft as well.
Security functions Protecting BIOS Setup Utility (supervisor password and user password) If you have opened these operating instructions on the screen, we recommend that you print them out. You cannot call up the instructions on the screen while you are setting up the password. BIOS SetupUtility The supervisor password and the user password both prevent unauthorized use of the BIOS Setup Utility.
Security functions Removing passwords To remove a password (without setting a new password) perform the following steps: User password Supervisorpassword Password ► Start the BIOS Setup Utility and go to the Security menu. ► Highlight the Set Supervisor Password or Set User Password field and press the Enter key. You will be requested to enter the current password by the Enter Current Password prompt. Enter New Password will appear and you will be requested to enter a new password.
Security functions Activating hard disk protection ► Call up the BIOS Setup and select the Security menu. If you have not assigned BIOS passwords yet, define the supervisor and the user password now, if desired (see "Security functions", Page 57). ► Mark the Hard Disk Security field and press the Enter key. ► In the area Drive0, mark the field Set Master Password and press the Enter key. Enter new Password then appears and you are asked to enter a password. ► Enter the password and press the Enter key.
Security functions SmartCard reader (optional) Your device may be fitted with a SmartCard reader depending on your chosen model (only available in models with screw holes and SmartCard reader). Securityfunctions SmartCards are not supplied as standard equipment. You can use all SmartCards that comply with the ISO standard 7816-1, -2 or -3. These SmartCards are available from various manufacturers.
Security functions Trusted Platform Module - TPM (device dependent) Trusted Platform Module TPM To use the TPM, you must enable the TPM in the BIOS Setup before the software is installed. The requirement for this is that you have assigned at least the supervisor HDD password (see "Security functions", Page 57). Enabling TPM • ► ► ► Requirement: You have assigned a supervisor password (see "Security functions", Page 57). Call BIOS Setup and select the Security menu.
Connecting external devices Connecting external devices Under all circumstances, please observe the safety notes provided in the "Important notes", Page 13 chapter before connecting or disconnecting any devices to or from your Tablet PC. Always read the documentation supplied with the device you wish to connect. Never connect or disconnect cables during a thunderstorm. Never pull at a cable when disconnecting it. Always grasp the plug.
Connecting external devices HDMI port (performance docking cradle only) HDMIport The HDMI port can be used to connect an external amplifier, LCD TV or a plasma TV with an HDMI connection. ► Connect the data cable to the external device. ► Connect the data cable to the HDMI port. Some LCD televisions have only two speakers/speaker ports and therefore cannot reproduce Dolby Digital or DTS. To play back HDMI sound, you must change the HDMI sound settings accordingly.
Connecting external devices Connecting USB devices USBports On the USB ports you can connect external devices that also have a USB port (e.g. a DVD drive, a printer, a scanner or a modem). USB devices are hot-pluggable. This means you can connect and disconnect the cables of USB devices while the operating system is running. USB 1.x has a maximum data transfer rate of 12 Mbps. USB 2.0 has a data transfer rate of up to 480 Mbps. USB 3.0 has a data transfer rate of up to 5 Gbps.
Connecting external devices Connecting external audio devices Your Tablet PC has a combined headphone and microphone port, your (optional) performance docking cradle has separate ports for headphones and a microphone.
Settings in BIOS Setup Utility Settings in BIOS Setup Utility BIOS SetupUtility System Configuringhardware Configuringsystem Setup Configuration,BIOSSetupUtility settings,BIOSSetupUtility To navigate more easily in the BIOS Setup Utility, you can use an external USB keyboard. The BIOS Setup Utility allows you to set the system functions and the hardware configuration for the Tablet PC. When the Tablet PC is delivered, the default settings are effective.
Settings in BIOS Setup Utility BIOS Setup Utility operation BIOS SetupUtility Press the F1 key to display help about operation of the BIOS Setup Utility. The description of the individual settings is shown in the right-hand window of the BIOS Setup Utility. With the F9 key you can load the default settings of the BIOS Setup Utility. ► Use the cursor keys ← or → to select the menu you wish to access to make changes. The menu is displayed on the screen.
Settings in BIOS Setup Utility Exiting BIOS Setup Utility BIOS SetupUtility You need to select the desired option in the Exit menu and activate it by pressing the Enter key: Exit Saving Changes - save changes and exit BIOS Setup Utility ► To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes. The Tablet PC is rebooted and the new settings come into effect.
Troubleshooting and tips Troubleshooting and tips Problem solving Fault Tips Troubleshooting If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows: ► Make a note of the steps and the circumstances that led to the fault. Also make a note of any error messages displayed. ► Switch the Tablet PC off. ► Please contact the Hotline/Service Desk.
Troubleshooting and tips Executing a reset If the device no longer responds to your inputs, choose one of the following options: Forced shutdown ► Press and hold the ON/OFF button for at least 4 seconds. The device will be shut down. You can then restart it. Resetting the rechargeable battery ► Shut down the device. If the device does not respond, you may have to force the shutdown, as described above. ► Disconnect the AC adapter from the device.
Troubleshooting and tips Battery indicator does not illuminate Cause The battery is discharged. Troubleshooting ► Charge the battery. or ► Connect the Tablet PC to a power outlet using the AC adapter. The Tablet PC’s touchscreen remains dark darktouchscreen Touchscreen Cause Touchscreen is switched off. External monitor or television set connected. Troubleshooting ► Press a key (external keyboard) or tap on the touchscreen.
Troubleshooting and tips The external monitor remains blank Monitor Cause Monitor is switched off. Power saving has been activated (monitor is blank). Brightness is set to dark. Troubleshooting ► Switch the external monitor on. ► Press a key (external keyboard) or tap on the touchscreen. ► Adjust the brightness of the monitor. Screen output is set to the Tablet PC ► Check whether the graphics driver settings touchscreen.
Troubleshooting and tips Stylus input not working Cause Incorrect driver installed. Troubleshooting ► If your device is one which can only be operated using the stylus, install the driver for the standard model. or ► If your device is one which can be operated using the stylus and by finger, install the driver for the "Dual Digitizer" model. The Tablet PC does not start after switch on TabletPC Cause The battery is dead. Troubleshooting ► Charge the battery.
Troubleshooting and tips The printer does not print Printer doesnotprint Cause The printer is not switched on. The printer is not connected correctly. The printer driver is faulty or not correctly installed, or it is the wrong printer driver. Troubleshooting ► Make sure that the printer is switched on and ready for operation (refer to the documentation supplied with the printer). ► Check that the data cable between the Tablet PC and the printer is properly connected.
Troubleshooting and tips Smart Card reader is not recognized Cause Smart Card inserted incorrectly. Troubleshooting ► Make sure you have inserted your Smart Card into the Smart Card reader with the chip facing upwards / downwards (device-dependent). ► Check whether the Smart Card you are using is supported. Your Smart Card must comply with the ISO standard 7816-1, -2, -3 and -4.
Troubleshooting and tips Acoustic warning Acoustic warnings Errors Cause A beep sounds every few seconds. Troubleshooting ► Charge the battery. The battery is almost dead.
Troubleshooting and tips Error messages on the screen Error messages onthescreen Errors This section describes the error messages generated by the BIOS Setup. Error messages displayed by the operating system or programs are described in the documentation for these programs. If the error message appears repeatedly despite troubleshooting measures, contact the place of purchase or our customer service center.
Troubleshooting and tips Error message/cause CMOS battery bad Troubleshooting ► Contact your sales outlet or our customer service center. If the error message occurs repeatedly, the buffer battery in the Tablet PC is flat. System CMOS checksum bad - Default configuration ► Switch the Tablet PC off. used ► Switch the Tablet PC on. The system configuration information is ► In the BIOS Setup, select the Exit menu. incorrect. ► Select the entry Load Setup Defaults. ► Select OK and press the Enter key.
Technical data Technical data Tablet PC General Processor Main memory (SO DIMM) Electrical data Intel® Core-M processor family 4 GByte / 8 GByte DIMM onboard Safety regulations complied with Protection class Maximum power consumption (when the Tablet PC is switched on, connected to the keyboard cover and the battery is being charged): Touchscreen Size CE II 65 W Screen resolution Pixel class Brightness control Technology 1920 x 1080 / 16 million colors II 12 levels Wide-View High-Bright Display with L
Technical data Docking port Micro HDMI port USB (Universal Serial Bus) Security Lock device Ambient conditions Environment class DIN IEC 721 Mechanism class DIN IEC 721 Operating temperature Transport temperature (2K2) 82 1 1 1 1 x x x USB 2.0, 1 x USB 3.0 x 7K1 7M2 5 °C .... 35 °C / 41 °F .... 95 °F –15 °C .... 60 °C / 5 °F ....
Technical data WLAN specifications Type of network Transfer rate Active frequency Typical operating distances Number of channels Security Maximum recommended number of computers to be connected over wireless LAN (during ad hoc connection) Fujitsu Intel® Dual Band Wireless-AC 8260 (Snowfield Peak) (11a/b/g/n/ac) with integ. Bluetooth 4.0 (Automatic switching) IEEE802.11 a and g: 54 Mbps max. data rate; IEEE802.11n: 300 Mbps max. data rate, IEEE802.11ac: 867 Mbps max. data rate • • • • • 802.11n: 2.
Technical data Rechargeable battery For information on the batteries used in your device, please see "http://solutions.us.fujitsu.com/www/content/support/contact/index.php". Rated voltage Rated capacity 3-cell lithium polymer battery 3450 mAh 11.1 V 38 Wh AC adapter 65 W for the Tablet PC Technicaldata Rated voltage Max. rated current 19 Volts 3.42 A An additional AC adapter or AC cable can be ordered at any time.
Technical data Keyboard cover (optional) Electrical data Safety regulations complied with Protection class Ports Docking port Ambient conditions Environment class DIN IEC 721 Mechanism class DIN IEC 721 Operating temperature Temperature in transit CE III 40-pin 7K1 7M2 5 °C .... 35 °C / 41 °F .... 95 °F –15 °C .... 60 °C / 5 °F .... 140 °F Shoulder strap (optional) Dimensions Width x Depth x Height 222 mm x 91 mm x 12.2 mm / Weight 8.74 in. x 3.58 in. x 0.48 in. 130 g / 0.29 lbs.
Manufacturer’s notes Manufacturer’s notes Disposal and recycling Notes You can find information on this subject on your Tablet PC or on our website ("http://solutions.us.fujitsu.com/www/content/products/trade-in_program/"). Recycling your battery Over time, the batteries that run your mobile computer will begin to hold a charge for a shorter amount of time; this is a natural occurrence for all batteries. When this occurs, you may want to replace the battery with a fresh one*.
Manufacturer’s notes UL Notice IMPORTANT SAFETY INSTRUCTIONS This unit requires an AC adapter to operate. Only use UL Listed I.T.E. adapters with an output rating of 19 VDC, with a minimum current of 3.42 A (65 W). The correct output rating is indicated on the AC adapter label.
Manufacturer’s notes ENERGY STAR Compliance Your Fujitsu system is an ENERGY STAR qualified mobile PC. By choosing a computer with the latest energy-saving technology, you’re helping to preserve our environment for future generations. ENERGY STAR is a joint program of the U.S. Environmental Protection Agency, U.S. Department of Energy, Natural Resources Canada, and other governments around the world helping us save money while protecting the environment through energy efficient products and practices.
Declarations of conformity Declarations of conformity Declarationsofconformity This device complies with Part 15 of the FCC Rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference, (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC and IC Regulatory Information FCC and IC Regulatory Information Please note the following regulatory information related to the wireless LAN device. Regulatory Notes and Statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions, however, are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones.
FCC and IC Regulatory Information Déclaration d’Industrie Canada Cet appareil est conforme à la Section 15 des Règles de la FC C et à la ( aux) norme(s) RSS concernant les appareils exempt s de licence par Industrie Canada. Son fonctionnement est soumis aux deux condition s suivantes : (1) cet appareil ne doit pas causer d’interférence nuisib le; (2) cet appareil doit accepter toutes les interférences reçues, y compris celles pouvan t causer un mauvais fonctionnement de l’appareil.
FCC and IC Regulatory Information Déclaration de la FCC/d’Industrie Canada sur l’exposition aux radiofréquences La norme régissant l’exposition des appareils sans fil aux radiofréquences emploie une unité de mesure dénommée Taux d’absorption spécifique, ou TAS. La FCC et Industrie Canada ont défini la même limite de TAS : 1,6 W/kg. Cet appareil est conforme au TAS pour les limites d’exposition générales de la population/non contrôlées définies par les règles C95.
FCC and IC Regulatory Information Avis pour le Canada Le matériel destiné à un usage sur la bande 5 150 - 5 250 MHz doit être utilisé uniquement à l’intérieur afin de réduire les risques de brouillage nuisible causé aux systèmes mobiles par satellite fonctionnant sur un même canal.
Appendix Appendix Before Using the Optional Wireless LAN This manual describes the procedures required to properly set up and configure the optional integrated Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of the manual). Before using the WLAN device, read this manual carefully to ensure its correct operation. Keep this manual in a safe place for future reference.
Appendix Access Point (Infrastructure) Mode Infrastructure mode refers to a wireless network architecture in which devices communicate with wireless or wired network devices by communicating through an Access Point. In infrastructure mode, wireless devices can communicate with each other or with a wired network. Corporate wireless networks operate in infrastructure mode because they require access to the WLAN in order to access services, devices, and computers (e.g., file servers, printers, databases).
Appendix ** * * = An optional hub for a wired LAN may be required depending upon the type of access point used. ** = ADSL modem, cable modem, or similar How to Handle This Device The WLAN device is an optional device that may come pre-installed in your mobile computer. Under normal circumstances, it should not be necessary for you to remove or re-install it. The Operating System that your mobile computer comes with has been pre-configured to support the WLAN device.
Appendix Deactivating/Disconnecting the WLAN Device Disconnecting the WLAN device may be desired in certain circumstances (to extend battery life) or where certain environments require it (i.e. hospitals, clinics, airplanes, etc.). The WLAN device can be disconnected in Windows using the WLAN icon in the system tray (Note that disconnecting via the icon in the system tray does not turn off the radio; it continues to transmit and receive even though it’s not connected.
Appendix Problem Possible Cause Possible Solution Unavailable network connection Incorrect network name (SSID) Ad hoc connection: verify that or network key the network names (SSID’s) and network keys (WEP) of all computers to be connected have been configured correctly. SSID’s and WEP key values must be identical on each machine. Access Point (Infrastructure) connection: set the network name (SSID) and network key to the same values as those of the access point.
Appendix Problem Possible Cause Unavailable network connection The WLAN device was (continued) deactivated or is disabled Possible Solution Check if the wireless switch is turned On. Go to Start > Control Panel, and doubleclick on Windows Mobility Center. If the wireless network is off, click the Turn wireless on button. The computer to be connected Check if the computer to be is turned off connected is turned ON. Incorrectly configured network Recheck the configuration of settings your network settings.
Appendix Creating a Backup of Bootable Disk and Recovery Image When you purchased your new system, a copy of the recovery image was loaded into a hidden partition on your hard disk drive. Having a copy of the recovery image available to you means that in the event of system failure, you will be able to restore it and re-install the essential access software using Fujitsu Software Auto Installer. To make a copy of the recovery image to DVD disks, you will need three or four blank disks to create the copy.
Appendix Creating a Backup of Essential Access Software When you purchased your new system, a “Fujitsu Software Extractor” shortcut was loaded to “C:\Fujitsu\Drivers\AutoInstaller\”. This shortcut allows you to save the software driver packages along with the extracted Auto Installer software package to a selected location. It is recommended that you save these packages to writable media or an external drive.
Appendix Determining whether Recovery and Utility is pre-loaded 1. Turn on or reboot your system. When the Fujitsu logo appears, press the F12 key. 2. Use the Tab key to get to the Application Menu. 3. Check whether the Recovery and Utility option is present. If it is not present, it means that the utility must be used from the Bootable Disk. Proceed to “Running Recovery and Utility from the Bootable Disk” if Recovery and Utility is unavailable. Running Recovery and Utility from hard disk 1. 2. 3. 4. 5.
Appendix Recovery and Utility tools Note: Recovery and Utility tools may not be available on your system depending on the region from which the system was shipped. Diagnostics tool: The Diagnostics tool is designed for use by IT professionals. It is not likely you will need to use this tool. If you should need to use this tool, perform the following steps: 1. Press the Diagnostics Tool button to start the Diagnostics tool. 2. Read the note, and then click OK. 3.
Appendix RECOVER YOUR SYSTEM WHEN THE HARD DRIVE IS NOT BOOTABLE Restore the Recovery Image for Full Hard Drive Follow the steps in the “Recovering your Recovery Image using Recovery and Utility (for new hard drive or non-bootable hard drive)” section. You will need the Bootable Disk and the Recovery Disk Set for this task. Utility tool: If applicable for your region, the Utility tool contains two options: Hard Disk Data Delete and Partition Creation.
Appendix Recovering Your Recovery Image Using Recovery and Utility (for new hard drive or non-bootable hard drive) If you have installed a new hard drive or your hard drive is not bootable, perform the following steps. Note: You will need the Bootable disk and Recovery Image disk set for this recovery. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Power on your system. When the Fujitsu logo appears on the screen, press the Enter key.
Appendix Installing the Software after the Recovery Image is Restored Auto-installation support for essential access software from hidden partition The below listed steps are applicable only in cases in which the recovery image restore and hidden partition contents have not been wiped out. 1. After the recovery image is restored, launch the desktop icon “Fujitsu Software Auto Installer”. 2. Double-click on “Fujitsu Software Auto Installer” desktop icon. 3. Click Yes on User Account Control Dialog box.
Appendix Auto-installation support for essential access software from backup location The below listed steps are applicable in cases in which a backup copy was created as mentioned in the section “Creating a Backup of essential access software”. 1. It is important to have the extracted Auto installer software package folder and Readme file in the same location as other software folders. Otherwise auto-installation of the software will not be supported. 2.
Appendix Downloading Driver Updates To ensure that you always have the most current driver updates related to your system, you should occasionally access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view and download a list of the most current drivers, utilities, and applications to determine whether you have the latest versions. To download the FSDM Utility, go to the Support Site: "http://support.fujitsupc.
Index Index A AC adapter connecting 19 Set up 19 Acoustic warnings 78 Anti-theft protection 58 Audio connections 67 E Ending energy saving mode 75 Energy Energy consumption 38 Energy saving 14 Energy saving functions 38 Error messages on the screen 79 Errors Acoustic warnings 78 Screen messages 79 Ethernet LAN 44 B Battery 37 battery charge 38 Caring for and maintaining 37 charge level 37 Charging 37 Discharges too quickly 76 see Rechargeable battery 37 Service life 37 battery charge meter 37 before you
Index Memory card handling 39 inserting 39 removing 40 Mobile operation 15 Monitor connection 65 no image 74 remains blank 74 unstable image 74 Monitor connection see VGA port 65 N Notes 13 disposal / recycling Energy saving 14 touchscreen 26 Transport 15 86 O Operating system activating system protection 60 cancel system protection 60 Protecting with password 60 P Packaging 18 Password changing 59 entering 59 removing 60 Password protection 58 hard disk 60 Pen 33 Portrait format display 27 Ports 46 Keyb
Index Troubleshooting 71 Trusted Platform Module U USB ports 66 User password change 59 entering 59 removing 60 V VGA port Fujitsu 63 W Webcam 37 Wireless components Safety notes 14 Wireless LAN Safety notes 14 Wrong date/time 72 65 111
