User's Manual

Important notes
Additional safety notes for devices with
wireless comp on en ts
Wirelesscom ponentsWirelessLANBluetooth,Safetynotes
If a wireless component (W ireless LAN, Bluetooth, 4G) is integrated in your Tablet PC, you must
be sure to observe the following safety precautions when using your Tablet PC :
• Switch off the wireless components when you are in an aircraft or driving in a car.
• Switch off the wireless components when you are in a hospital, an operating
room or near a medical electronics system. The transmitted radio waves
can impair the operation of medical devices.
• Switch off the wireless components, when you let the device get near flammable
gases or into hazardou s environment s (e. g. gas statio n, paint stores), as the
transmitted radio waves can cause an explosion or a fire.
For further information on how to switch the wireless components on and off, refer
to section "
Switch ing the wire less components on and off", Page 42.
Protecting the d isplay screen
Depending on your
device configuration, where applicable your device is not waterpro of.
In this event, do
not pour liquids onto the device and do not wash it with a wet cloth.
Do not place ite
ms on the top of the display, or damage may occur.
The warranty do
es not cover a scratched screen.
Energy saving
NotesEnergyPowersaving
If you will not be using your Tablet PC, switch it off. Switch off any connected external devices when
they are not in use. If you use the energy-saving functions, the Tablet PC uses less power. If you do
this, you will be able to work longer with the Tablet PC before having to recharge the battery.
The energy efficiency is increased and environmental p ollution i s reduced.
You save mone y and help protect the environ ment.
Energy saving under Windows
► Make use of t he available energy-saving functions as d e scribed in chapter
"
Using the ener gy saving functions", Page 38.
14 Fujitsu