Operation Manual
System expansions
76 Fujitsu Technology Solutions
Removing SmartCard reader and/or WLAN module
► Open the casing (see "Opening the casing").
► Remove the cross-piece (see "
Removing the cross-piece”).
► Fold up the drive cage (see "
Folding up the drive cage").
1
1
► Remove the screws (1).
► Disconnect the cables.
► Fold down the drive cage (see "
Folding down the drive cage").
► Pull the holder out of the casing in direction of the arrow.
► If you do not install another diskette drive or hard drive, install the EMC cover (see “
Installing
the EMC cover”).
► Replace the cross piece (see "
Installing the cross-piece").
!
If you remove the SmartCard reader and/or the WLAN module without replacing it with a
floppy drive, you must reinstall the bay cover for reasons of cooling and fire protection and
to comply with the prevailing EMC (electromagnetic compatibility) regulations.
► Mount the cover in the casing top cover if necessary (see "Installing plastic drive cover").
► Close the casing (see "
Closing the casing").
i
More detailed information on the use of Wireless LAN can be found in the "Wireless LAN"
manual. This manual is provided as PDF file on the "User Documentation" or
"Drivers & Utilities" CD.