Operation Manual

Getting started
Setting up the device
VideoworkstationErgonomicDevice,
When installing your device, please read the recommendations and
safety notes in the "Safety" manual.
We recommend that you place your device on a surface with good anti-slip qualities.
In view of the multitude of different finishes and varnishes used on furniture, it is
possible that the rubber feet will m a rk the surface they stand on.
Depending on the location of your device, bothersome vibrations and no ises may
occur. To prevent this, a distance of at least 10 mm / 0.39 in should be maintained
from other devices on casing sides without ventilation surfaces.
In order to avoid overheating, do not cover the ventilation areas
on the monitor or the device.
A minimum distance of 200 mm / 7.87 in from the device must be
observed for ventilation areas.
Do not stack several devices on top of each other.
Do not expose the device to extreme ambient conditions (see "
Technical specification",
Page 66, "Ambient conditions"). Protect th e device ag ainst dust, humidity a nd heat.
Operating positi
on
You can use the de
vice in a vertical or horizontal operating position.
With the aid of s
uitable feet, it is possible to use the device in a vert ical operating
position (see "
Vertical operating posit ion (optional)", Page 15).
14 Fujitsu