Betriebsanleitung ESPRIMO E5xx / E7xx / E9xx System
Wir gratulieren Ihnen zum Kauf eines innovativen Produkts von Fujitsu. Aktuelle Informationen zu unseren Produkten, Tipps, Updates usw. finden Sie im Internet: "http://www.fujitsu.com/fts/" Automatische Treiber-Updates erhalten Sie unter: "http://support.ts.fujitsu.com/download" Wenn Sie technische Fragen haben sollten, wenden Sie sich bitte an: • unsere Hotline/Service Desk (siehe Service-Desk-Liste oder im Internet: "http://support.ts.fujitsu.
Herausgegeben von Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 München, Germany Kontakt http://www.fujitsu.com/fts/ Copyright © Fujitsu Technology Solutions GmbH 2012. Alle Rechte vorbehalten. Ausgabedatum 10/2012 Bestell-Nr.
ESPRIMO E5xx / E7xx / E9xx Betriebsanleitung Ihr ESPRIMO 5 Anschlüsse und Bedienelemente 7 Wichtige Hinweise 10 Inbetriebnahme 13 Bedienung 23 Problemlösungen und Tipps 31 Systemerweiterungen 36 Technische Daten 67 Stichwörter 68
Bemerkung Hinweise zur Produktbeschreibung entsprechen den Designvorgaben von Fujitsu und werden zu Vergleichszwecken zur Verfügung gestellt. Die tatsächlichen Ergebnisse können aufgrund mehrerer Faktoren abweichen. Änderungen an technischen Daten ohne Ankündigung vorbehalten. Fujitsu weist jegliche Verantwortung bezüglich technischer oder redaktioneller Fehler bzw. Auslassungen von sich.
Inhalt Inhalt Ihr ESPRIMO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Gültigkeit der Beschreibung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Darstellungsmittel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inhalt Problemlösungen und Tipps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hilfe im Problemfall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Problemlösungen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ihr ESPRIMO Ihr ESPRIMO Übersicht ... ist in verschiedenen Ausbaustufen verfügbar, die sich in Hardware- und Software-Ausstattung unterscheiden. Sie können zusätzliche Laufwerke (z. B. DVD-Laufwerk) und weitere Baugruppen einbauen. Dieses Handbuch zeigt Ihnen, wie Sie das Gerät in Betrieb nehmen und bedienen. Das Handbuch bezieht sich auf alle Ausbaustufen. Je nach gewählter Ausbaustufe kann es vorkommen, dass in Ihrem Gerät nicht alle dargestellten Hardware-Komponenten verfügbar sind.
Ihr ESPRIMO Darstellungsmittel kennzeichnet Hinweise, bei deren Nichtbeachtung Ihre Gesundheit, die Funktionsfähigkeit Ihres Geräts oder die Sicherheit Ihrer Daten gefährdet sind.
Anschlüsse und Bedienelemente Anschlüsse und Bedienelemente Anschlüsse In diesem Kapitel werden die einzelnen Hardware-Komponenten Ihres Geräts vorgestellt. Sie erhalten eine Übersicht über die Anschlüsse und Bedienelemente des Geräts. Machen Sie sich mit diesen Elementen vertraut, bevor Sie mit dem Gerät arbeiten.
Anschlüsse und Bedienelemente Gerät mit Wechselspannungsbuchse, Bildschirmsteckdose und Not-Ein-Taster 5 4 1 2 3 1 = Wechselspannungsbuchse (AC IN) 2 = Bildschirmsteckdose 3 = Not-Ein-Taster 4 = Anschlüsse für externe Geräte (geräteabhängig) 5 = Steckplatzabdeckungen (abgebildet: Low-Profile-Baugruppen-Käfig) Gerät mit Wechselspannungsbuchse und Hauptschalter 4 3 1 1 = Wechselspannungsbuchse (AC IN) 2 = Hauptschalter 3 = Anschlüsse für externe Geräte (geräteabhängig) 8 2 4 = Steckplatzabdeckungen
Anschlüsse und Bedienelemente Gerät mit Wechselspannungsbuchse und Bildschirmsteckdose 4 3 1 2 1 = Wechselspannungsbuchse (AC IN) 2 = Bildschirmsteckdose 3 = Anschlüsse für externe Geräte (geräteabhängig) Fujitsu 4 = Steckplatzabdeckungen (abgebildet: Low-Profile-Baugruppen) 9
Wichtige Hinweise Wichtige Hinweise Wichtige Hinweise Hinweise In diesem Kapitel finden Sie unter anderem Sicherheitshinweise, die Sie beim Umgang mit Ihrem Gerät unbedingt beachten müssen. Sicherheitshinweise Hinweis Sicherheitshinweise Beachten Sie die Sicherheitshinweise im Handbuch "Sicherheit/Regularien" und die nachfolgenden Sicherheitshinweise.
Wichtige Hinweise Gerät reinigen Systemeinheit,sieheGerät Wiedertransport Transport Gerät Schalten Sie das Gerät und alle daran angeschlossenen Geräte aus und ziehen Sie den Netzstecker aus der Steckdose. Der Gehäuseinnenraum des Geräts darf nur von autorisiertem Fachpersonal gereinigt werden. Verwenden Sie für die Reinigung kein Scheuerpulver und keine Kunststoff lösenden Reinigungsmittel (Alkohol, Verdünnung oder Acethon).
Wichtige Hinweise FCC Compliance Statement If the device complies with the FCC regulations, the FCC sign can be found on the type rating plate. FCC Class B Compliance Statement DOC (INDUSTRY CANADA) NOTICES Notice to Users of Radios and Television : This class B digital apparatus complies with Canadian ICES-003. The following statement applies to the products covered in this manual, unless otherwise specified herein. The statement for other products will appear in the accompanying documentation.
Inbetriebnahme Inbetriebnahme Inbetriebnahme Beachten Sie die Sicherheitshinweise im Kapitel "Wichtige Hinweise", Seite 10. Lieferinhalt auspacken und überprüfen Die Originalverpackung der Geräte sollten Sie für einen eventuellen Transport aufbewahren. Lieferinhalt Verpackung ► ► ► ► Packen Sie alle Teile aus. Prüfen Sie den Verpackungsinhalt auf sichtbare Transportschäden. Prüfen Sie, ob die Lieferung mit den Angaben auf dem Lieferschein übereinstimmt.
Inbetriebnahme Gerät aufstellen Gerät Ergonomisch Bildschirmarbeitsplatz Berücksichtigen Sie beim Aufstellen des Geräts die Empfehlungen und Sicherheitshinweise im Handbuch "Sicherheit". Wir empfehlen Ihnen, das Gerät auf eine rutschfeste Unterlage zu stellen. Bei der Vielfalt der bei Möbeln verwendeten Beschichtungen und Lacke ist es nicht auszuschließen, dass die Kunststoff-Füße Schäden auf der Stellfläche verursachen.
Inbetriebnahme Senkrechte Betriebslage (optional) Benutzen Sie die optionalen Gummi- oder Aufstellfüße, wenn Sie das Gerät in senkrechter Betriebslage betreiben wollen. Die Aufstellrichtung ist vorgeschrieben: Der Ein-/Ausschalter muss oben liegen, damit eine ausreichende Belüftung gewährleistet ist. Der Betrieb in senkrechter Betriebslage ist in Taiwan nicht erlaubt.
Inbetriebnahme Gerät mit Gummifüßen nutzen (optional) Gehen Sie wie folgt vor, um das Gerät mit den Gummifüßen in senkrechter Betriebslage zu betreiben: ► Lösen Sie gegebenfalls die Leitungen am Gerät. ► Stellen Sie das Gehäuse zunächst senkrecht, sodass sich der Ein-/Ausschalter unten befindet. ► Ziehen Sie die Folie von den Gummifüßen, die sich im Beipack befinden. 40 mm 1 1 1 1 6 mm ► Kleben Sie die Gummifüße (1) auf die Gehäusewand.
Inbetriebnahme Externe Geräte anschließen Lesen Sie die Dokumentation zum externen Gerät, bevor Sie es anschließen. Außer bei USB-Geräten müssen die Netzstecker gezogen sein, wenn Sie externe Geräte anschließen! Bei Gewitter dürfen Sie Leitungen weder stecken noch lösen. Fassen Sie beim Lösen einer Leitung immer am Stecker an. Ziehen Sie nicht an der Leitung! Halten Sie beim Anschließen oder Lösen von Leitungen die nachfolgend beschriebene Reihenfolge ein.
Inbetriebnahme Anschlüsse am Gerät Gerät ExterneGeräte Schnittstellen Die Anschlüsse finden Sie an Vorder- und Rückseite des Geräts. Welche Anschlüsse an Ihrem Gerät verfügbar sind, hängt davon ab, welche Ausbaustufe Sie gewählt haben. Die Standardanschlüsse sind durch die nachfolgenden oder durch ähnliche Symbole gekennzeichnet. Genauere Angaben zur Position der Anschlüsse finden Sie im Handbuch zum Mainboard.
Inbetriebnahme Maus anschließen Sie können eine USB-Maus oder eine PS/2-Maus an Ihr Gerät anschließen. Anschließen Maus USB-Maus anschließen ► Schließen Sie die USB-Maus an einen USB-Anschluss des Geräts an. USB-Anschluss PS/2-Maus anschließen Die PS/2-Maus wird vom Gerät nur erkannt, wenn Sie die Maus bei ausgeschaltetem Gerät anschließen und das Gerät anschließend wieder einschalten. ► Schalten Sie Ihr Gerät aus.
Inbetriebnahme Externe Geräte an die serielle Schnittstelle anschließen Geräte ExterneGeräte SerielleSchnittstelle An die serielle Schnittstelle können Sie externe Geräte anschließen (z. B. einen Drucker oder ein Modem). ► Schließen Sie die Datenleitung an das externe Gerät an. ► Schließen Sie die Datenleitung je nach Gerät an die serielle Schnittstelle an. Eine genaue Beschreibung, wie Sie das externe Gerät an die passende Schnittstelle anschließen, entnehmen Sie der Dokumentation zum externen Gerät.
Inbetriebnahme Erstes Einschalten: die Software wird installiert Software Installation Nach dem Beginn der Installation darf das Gerät nicht ausgeschaltet werden, bis die Installation abgeschlossen ist! Während der Installation darf das Gerät nur bei Aufforderung neu gestartet werden! Die Installation wird sonst nicht korrekt durchgeführt und der Festplatteninhalt muss vollständig wiederhergestellt werden.
Inbetriebnahme Installation der Software ► Befolgen Sie während der Installation die Anweisungen am Bildschirm. ► Lesen Sie bei Unklarheiten bezüglich der angeforderten Eingabedaten in der Hilfe zu Ihrem Betriebssystem nach. Installation Software Weitere Informationen zum System sowie Treiber, Utilities und Updates finden Sie auf der DVD "Drivers & Utilities" und im Internet unter "http://www.fujitsu.com/fts/support".
Bedienung Bedienung Gerät einschalten ► Schalten Sie gegebenenfalls den Bildschirm ein (siehe Betriebsanleitung des Bildschirms). ► Schalten Sie das Gerät mit dem Hauptschalter an der Rückseite des Geräts ein (falls vorhanden). ► Drücken Sie den Ein-/Ausschalter an der Vorderseite des Geräts. Die Betriebsanzeige leuchtet, das Gerät startet.
Bedienung Gerät ausschalten ► Beenden Sie ordnungsgemäß Ihr Betriebssystem. ► Wenn das Betriebssystem das Gerät nicht automatisch in einen Energiesparmodus wechselt oder ausschaltet, drücken Sie den Ein-/Ausschalter. Achtung, dies kann zu einem Verlust Ihrer Daten führen! ► Schalten Sie das Gerät mit dem Hauptschalter aus (falls vorhanden).
Bedienung Anzeigen am Gerät Gerät Anzeigen Die Anzeigen finden Sie an der Vorderseite des Gehäuses. Welche Anzeigen an Ihrem Gerät vorhanden sind, hängt davon ab, welche Ausbaustufe Sie gewählt haben. 1 Nr. 1 Anzeige 2 Anzeige für optionale Komponente, z. B. SmartCard-Reader Laufwerksanzeige 3 Betriebsanzeige 2 3 4 Beschreibung Die Anzeige leuchtet, wenn auf die optionale Komponente, z. B. den SmartCard-Leser, zugegriffen wird.
Bedienung Tastatur Alphanumerisches Tastaturfeld Tastastur Tastatur NumerischesTastaturfeld Ziffernblock Funktionstasten Tasten Cursortasten Die abgebildete Tastatur ist ein Beispiel und kann von dem von Ihnen verwendeten Modell abweichen.
Bedienung Taste / Tastenkombination Beschreibung Windows-Taste (geräteabhängig: Variante 1) Tasten ruft das Menü Start von Windows auf. Tasten Menütaste (geräteabhängig: Variante 1) ruft das Menü für das markierte Objekt auf (Windows). Tasten Windows-Taste (geräteabhängig: Variante 2) Die Windows-Taste wechselt zwischen Startbildschirm und der zuletzt genutzten Anwendung. Tasten Menütaste (geräteabhängig: Variante 2) Die Menütaste ruft das Menü für die aktive Anwendung auf.
Bedienung Einstellungen im BIOS-Setup Setup Systemeinstellung BIOS-Setup Im BIOS-Setup können Sie Systemfunktionen und die Hardware-Konfiguration des Geräts einstellen. Bei Auslieferung sind die Standardeinträge wirksam (siehe Handbuch "BIOS-Setup" oder Handbuch zum Mainboard). Diese Einstellungen können Sie im BIOS-Setup an Ihre Anforderungen anpassen.
Bedienung Gehäuse mechanisch verriegeln (optional) Gehäuseschloss Schloss Gehäuse Gehäusemechanischverriegeln Mit dem Gehäuseschloss können Sie das Gehäuse mechanisch verriegeln, um unberechtigte Personen am Öffnen des Gehäuses zu hindern. Die Schlüssel befinden sich an der Rückseite Ihres Geräts. 2 1 Gehäuse entriegeln ► Drehen Sie den Schlüssel in Pfeilrichtung (1). Gehäuse verriegeln ► Drehen Sie den Schlüssel in Pfeilrichtung (2).
Bedienung Sicherheitsfunktionen des BIOS-Setup BIOS-Setup Sicherheitsfunktionen Im BIOS-Setup bietet Ihnen das Menü Security verschiedene Möglichkeiten, Ihre persönlichen Daten gegen unbefugten Zugriff zu schützen, z. B.
Problemlösungen und Tipps Problemlösungen und Tipps Beachten Sie die Sicherheitshinweise im Handbuch "Sicherheit" und das Kapitel "Inbetriebnahme", Seite 13, wenn Sie Leitungen lösen oder anschließen.
Problemlösungen und Tipps Das Gerät lässt sich nicht mit dem Ein-/Ausschalter ausschalten Ursache Fehlerbehebung Systemabsturz ► Drücken Sie den Ein-/Ausschalter mindestens 4 Sekunden, bis sich das Gerät ausschaltet. Achtung: Dies kann zu einem Verlust Ihrer Daten führen! Dabei wird das Betriebssystem nicht ordnungsgemäß beendet. Beim nächsten Systemstart sind deshalb Fehlermeldungen möglich.
Problemlösungen und Tipps Ursache Netzleitung nicht angeschlossen Bildschirmleitung nicht angeschlossen Falsche Einstellung für den Bildschirm Fujitsu Fehlerbehebung ► Schalten Sie den Bildschirm und das Gerät aus. ► Prüfen Sie, ob die Netzleitung des Bildschirms ordnungsgemäß am Bildschirm und an einer geerdeten Schutzkontakt-Steckdose oder an der Bildschirmsteckdose des Geräts gesteckt ist.
Problemlösungen und Tipps Kein Mauszeiger am Bildschirm Ursache Maus ist nicht richtig angeschlossen. Maus-Controller ist nicht eingeschaltet. Fehlerbehebung ► Beenden Sie Ihr Betriebssystem ordnungsgemäß. ► Schalten Sie das Gerät aus. ► Prüfen Sie, ob die Mausleitung ordnungsgemäß angeschlossen ist. Wenn Sie einen Adapter oder eine Verlängerung für die Mausleitung verwenden, prüfen Sie auch diese Steckverbindung. ► Schalten Sie das Gerät ein.
Problemlösungen und Tipps Neue Software installieren Bei der Installation von Programmen oder Treibern können wichtige Dateien überschrieben und verändert werden. Um bei eventuellen Problemen nach der Installation auf die Originaldateien zugreifen zu können, sollten Sie vor der Installation eine Sicherungskopie (Backup) Ihres Festplatteninhaltes erstellen. Festplatteninhalt wiederherstellen Die Anleitung zum Wiederherstellen des Festplatteninhaltes finden Sie im Handbuch "Recovery Guide".
Systemerweiterungen Systemerweiterungen Servicefall Komponenten Systemerweiterung Gerät Erweiterungen Reparaturen am Gerät dürfen nur von autorisiertem Fachpersonal durchgeführt werden. Durch unsachgemäße Reparaturen erlischt die Garantie und es können erhebliche Gefahren für den Benutzer entstehen (elektrischer Schlag, Brandgefahr). Nach Rücksprache mit der Hotline/Service Desk dürfen Sie die in diesem Handbuch beschriebenen Komponenten selbst aus- und einbauen.
Systemerweiterungen Hinweise zu Baugruppen Gehen Sie sorgfältig mit den Verriegelungsmechanismen um (Rastnasen und Zentrierbolzen), wenn Sie Baugruppen oder Komponenten auf Baugruppen austauschen. Beachten Sie, dass verschiedene Komponenten auf dem Mainboard sehr heiß sein können, wenn das Gerät vor kurzem noch aktiv war. Um Schäden der Baugruppe oder der darauf befindlichen Bauteile und Leiterbahnen zu vermeiden, bauen Sie Baugruppen mit Sorgfalt ein und aus.
Systemerweiterungen Gehäusedeckel entfernen ► Schalten Sie das Gerät aus. Das Gerät darf sich nicht im Energiesparmodus befinden! ► Entfernen Sie störende, gesteckte Leitungen. 3 2 1 ► Schieben Sie die Verriegelung in Pfeilrichtung (1). ► Schieben Sie den Gehäusedeckel ein Stück weit in Pfeilrichtung (2) und nehmen Sie ihn ab (3).
Systemerweiterungen Gehäusedeckel wieder anbringen 1 2 ► Setzen Sie den Gehäusedeckel auf das Gehäuse (1) und schieben Sie ihn bis zum Anschlag in Pfeilrichtung (2). Der Gehäusedeckel schnappt automatisch ein, ohne dass die Verriegelung betätigt werden muss. ► Stecken Sie die Leitungen am Gerät.
Systemerweiterungen Laufwerkskäfig aufklappen Laufwerkskäfig ► Entfernen Sie den Gehäusedeckel (siehe Kapitel "Gehäusedeckel entfernen", Seite 38). Achten Sie beim Aufklappen des Laufwerkskäfigs darauf, dass Sie den Laufwerkskäfig wie abgebildet nur bis zu einem Winkel von 90 Grad aufklappen. 1 ► Klappen Sie den Laufwerkskäfig auf (1).
Systemerweiterungen Laufwerkskäfig zuklappen Laufwerkskäfig Achten Sie beim Zuklappen des Laufwerkskäfig darauf, dass keine Leitungen eingeklemmt werden. Achten Sie darauf, dass die Verriegelungen der Speichermodule geschlossen sind. 1 ► Klappen Sie den Laufwerkskäfig zu (1). ► Bringen Sie den Gehäusedeckel wieder am Gehäuse an (siehe Kapitel "Gehäusedeckel wieder anbringen", Seite 39).
Systemerweiterungen Bedienbares 51/4-Zoll-Laufwerk ein- und ausbauen Laufwerksblech für 51/4-Zoll-Laufwerk anbringen Um die Verriegelungsfunktion des bedienbaren 51/4-Zoll-Laufwerks zu nutzen, müssen Sie vor dem Einbau des Laufwerks in das Gehäuse das dazugehörige Laufwerksblech am Laufwerk anbringen. Gehen Sie wie folgt vor: Das Laufwerksblech befindet sich entweder am Laufwerksplatzhalter oder am verbauten Laufwerk. ► Entfernen Sie den Gehäusedeckel (siehe Kapitel "Gehäusedeckel entfernen", Seite 38).
Systemerweiterungen Bedienbares Laufwerk einbauen ► Entfernen Sie den Gehäusedeckel (siehe Kapitel "Gehäusedeckel entfernen", Seite 38). 2 1 ► Fall kein Laufwerk eingebaut ist, bauen Sie den Laufwerkplatzhalter aus. Dazu schieben Sie die Verriegelung in Pfeilrichtung (1). ► Ziehen Sie das Laufwerk in Pfeilrichtung (2) aus dem Laufwerkskäfig. Werfen Sie den Laufwerksplatzhalter nicht weg.
Systemerweiterungen 1 ► Schieben Sie das neue Laufwerk in den Laufwerkskäfig (1), bis es einrastet. ► Stecken Sie die Leitungen an das Laufwerk. Achten Sie auf die richtige Polung. ► Bringen Sie den Gehäusedeckel wieder am Gehäuse an (siehe Kapitel "Gehäusedeckel wieder anbringen", Seite 39). Wenn notwendig, müssen Sie im BIOS-Setup den Eintrag für das Laufwerk entsprechend anpassen.
Systemerweiterungen Bedienbares Laufwerk ausbauen ► Entfernen Sie den Gehäusedeckel (siehe Kapitel "Gehäusedeckel entfernen", Seite 38). ► Entfernen Sie die am Laufwerk gesteckten Leitungen. 2 1 ► Schieben Sie die Verriegelung in Pfeilrichtung (1). ► Ziehen Sie das Laufwerk in Pfeilrichtung (2) aus dem Laufwerkskäfig. ► Falls Sie kein neues Laufwerk einbauen, befestigen Sie den Laufwerksplatzhalter am Einbauplatz, um das Eindringen von Fremdkörpern in das Gehäuse zu vermeiden.
Systemerweiterungen SmartCard-Leser, WLAN-Modul oder Multicard-Leser ein und ausbauen (optional, 3½-Zoll) Der Betrieb der Module ist in Taiwan nicht erlaubt. In den Einbauplatz für 3½-Zoll-Laufwerke können Sie einen SmartCard-Leser und/oder ein WLAN-Modul für Wireless LAN (Local Area Network) einbauen. SmartCard-Leser und WLAN-Modul können zusammen in die Modulhalterung eingebaut werden. Sie können aber auch nur eine der beiden Baugruppen einbauen.
Systemerweiterungen WLAN-Modul an Modulhalterung festschrauben ► Schieben Sie das WLAN-Modul in Pfeilrichtung (1) mit der Bauteilseite nach unten in die Führung der Modulhalterung (a). ► Befestigen Sie das WLAN-Modul mit der Schraube (2). 2 a a 1 SmartCard-Leser an Modulhalterung festschrauben ► Schieben Sie den SmartCard-Leser in Pfeilrichtung (1) mit der Bauteilseite nach unten in die Führung der Modulhalterung (a). ► Befestigen Sie den SmartCard-Leser mit den Schrauben (2).
Systemerweiterungen Modulhalterung mit SmartCard-Leser und/oder WLAN-Modul oder Multicard-Leser einbauen 1 ► Schieben Sie die Modulhalterung /den Multicard-Leser in Pfeilrichtung (1) in den Laufwerkskäfig. ► Klappen Sie den Laufwerkskäfig auf (siehe Kapitel "Laufwerkskäfig aufklappen", Seite 40). 1 1 ► Befestigen Sie die Modulhalterung /den Multicard-Leser mit den Schrauben (1). ► Stecken Sie die Leitungen an die Modulhalterung /den Multicard-Leser. Achten Sie auf die richtige Polung.
Systemerweiterungen Modulhalterung mit SmartCard-Leser und/oder WLAN-Modul oder Multicard-Leser ausbauen ► Entfernen Sie die an der Modulhalterung / am Multicard-Leser gesteckten Leitungen. 1 1 ► Entfernen Sie die Schrauben (1) an der Modulhalterung / am Multicard-Leser. ► Klappen Sie den Laufwerkskäfig wieder zu (siehe Kapitel "Laufwerkskäfig zuklappen", Seite 41). 1 ► Schieben Sie die Modulhalterung / den Multicard-Leser in Pfeilrichtung (1) aus dem Gehäuse.
Systemerweiterungen SmartCard-Leser von Modulhalterung lösen 1 1 ► Lösen Sie die Schrauben (1). ► Ziehen Sie den SmartCard-Leser in Pfeilrichtung aus der Modulhalterung. WLAN-Modul von Modulhalterung lösen 1 50 ► Lösen Sie die Schraube (1). ► Ziehen Sie das WLAN-Modul in Pfeilrichtung aus der Modulhalterung.
Systemerweiterungen Ein-/Ausbau abschließen 1 1 ► Befestigen Sie das Abdeckblech am Einbauplatz für 3½-Zoll-Laufwerke (1). ► Befestigen Sie die Gehäuseabdeckung des Einbauplatzes im Gehäusedeckel. ► Bringen Sie den Gehäusedeckel wieder am Gehäuse an (siehe Kapitel "Gehäusedeckel wieder anbringen", Seite 39).
Systemerweiterungen Festplattenlaufwerk ein- und ausbauen Festplattenlaufwerk einbauen ► Entfernen Sie den Gehäusedeckel (siehe Kapitel "Gehäusedeckel entfernen", Seite 38). EasyChange-Schienen für das Festplattenlaufwerk finden Sie im Laufwerkskäfig. ► Befestigen Sie die EasyChange-Schienen seitlich am Festplattenlaufwerk, indem Sie jeweils die oberen Stifte der EasyChange-Schiene in die entsprechenden Löcher der Festplatte stecken.
Systemerweiterungen 1 ► Schieben Sie das Festplattenlaufwerk mit den EasyChange-Schienen in Pfeilrichtung (1) in den Laufwerkskäfig. Achten Sie darauf, dass die Bauteilseite des Festplattenlaufwerks nach unten zum Gehäuseboden zeigt. ► Stecken Sie die Leitungen an das Festplattenlaufwerk. ► Bringen Sie den Gehäusedeckel wieder am Gehäuse an (siehe Kapitel "Gehäusedeckel wieder anbringen", Seite 39). Wenn notwendig, müssen Sie im BIOS-Setup den Eintrag für das Laufwerk entsprechend anpassen.
Systemerweiterungen Festplattenlaufwerk ausbauen ► Entfernen Sie den Gehäusedeckel (siehe Kapitel "Gehäusedeckel entfernen", Seite 38). ► Entfernen Sie die am Festplattenlaufwerk gesteckten Leitungen. 2 1 1 ► Drücken Sie die EasyChange-Schienen am Festplattenlaufwerk etwas zusammen (1) und ziehen Sie das Festplattenlaufwerk in Pfeilrichtung (2) aus dem Laufwerkskäfig.
Systemerweiterungen ► Ziehen Sie die EasyChange-Schienen vom Festplattenlaufwerk. ► Wenn Sie die EasyChange-Schienen nicht mehr benötigen, befestigen Sie diese wieder an ihrem Einbauplatz im Laufwerkskäfig. ► Bringen Sie den Gehäusedeckel wieder am Gehäuse an (siehe Kapitel "Gehäusedeckel wieder anbringen", Seite 39). Wenn notwendig, müssen Sie im BIOS-Setup den Eintrag für das Laufwerk entsprechend anpassen.
Systemerweiterungen Baugruppen ein- und ausbauen Je nach Gerätevariante ist Ihr Gerät mit Steckplätzen für High-Profile-Baugruppen oder für Low-Profile-Baugruppen ausgestattet. High-Profile-Baugruppe ein- und ausbauen (geräteabhängig) Um die Leistungsfähigkeit Ihres Geräts zu erhöhen, können Sie zusätzliche Baugruppen einbauen. Die Anzahl, Lage und Anordnung der Baugruppen-Steckplätze auf dem Mainboard finden Sie im Handbuch zum Mainboard. Bei Auslieferung können bereits Baugruppen eingebaut sein.
Systemerweiterungen Steckplatzabdeckung entfernen ► Lösen Sie die Schraube (1, optional). ► Ziehen Sie die Steckplatzabdeckung aus dem Steckplatz (2). 1 2 Werfen Sie die Steckplatzabdeckung nicht weg. Wenn Sie die Baugruppe wieder entfernen, müssen Sie die Steckplatzabdeckung wegen der Kühlung, des Brandschutzes und der einzuhaltenden EMV-Vorschriften (Vorschriften zur elektromagnetischen Verträglichkeit) wieder einbauen.
Systemerweiterungen Baugruppe einbauen ► Schieben Sie die Baugruppe in den Steckplatz (1), bis sie einrastet. ► Befestigen Sie die Schraube (2, optional). 2 1 ► Wenn erforderlich, stecken Sie die Leitungen an der Baugruppe. Wenn Sie eine Baugruppe ein- oder ausgebaut haben, dann prüfen Sie im BIOS-Setup die Einstellungen für den entsprechenden PCI-Steckplatz. Ändern Sie gegebenenfalls die Einstellungen. Lesen Sie hierzu die Dokumentation zur PCI-Baugruppe.
Systemerweiterungen Steckplatzabdeckung wieder einbauen ► Schieben Sie die Steckplatzabdeckung in den Steckplatz (1). ► Befestigen Sie die Schraube (2, optional). 2 1 Baugruppen-Käfig einbauen 2 1 ► Schließen Sie die Verriegelung am Baugruppen-Käfig (1). ► Setzen Sie den Baugruppen-Käfig in das Gehäuse (1). ► Bringen Sie den Gehäusedeckel wieder am Gehäuse an (siehe Kapitel "Gehäusedeckel wieder anbringen", Seite 39).
Systemerweiterungen Low-Profile-Baugruppen ein- und ausbauen (geräteabhängig) Low-Profile-Baugruppe Für jeden Steckplatz existiert eine Steckplatzabdeckung. Wenn keine Baugruppe eingebaut ist, schützt die Steckplatzabdeckung den Steckplatz. Wenn Sie eine Baugruppe einbauen, werfen Sie die entsprechende Steckplatzabdeckung nicht weg.
Systemerweiterungen Steckplatzabdeckung entfernen ► Lösen Sie die Schraube (1, optional). ► Ziehen Sie die Steckplatzabdeckung aus dem Steckplatz (2). 1 2 Werfen Sie die Steckplatzabdeckung nicht weg. Wenn Sie die Baugruppe wieder entfernen, müssen Sie die Steckplatzabdeckung wegen der Kühlung, des Brandschutzes und der einzuhaltenden EMV-Vorschriften (Vorschriften zur elektromagnetischen Verträglichkeit) wieder einbauen.
Systemerweiterungen Baugruppe einbauen ► Schieben Sie die Baugruppe in den Steckplatz (1), bis sie einrastet. ► Befestigen Sie die Schraube (2, optional). 2 1 ► Wenn erforderlich, stecken Sie die Leitungen an der Baugruppe. Wenn Sie eine Baugruppe ein- oder ausgebaut haben, dann prüfen Sie im BIOS-Setup die Einstellungen für den entsprechenden PCI-Steckplatz. Ändern Sie gegebenenfalls die Einstellungen. Lesen Sie hierzu die Dokumentation zur PCI-Baugruppe.
Systemerweiterungen Steckplatzabdeckung wieder einbauen 2 ► Schieben Sie die Steckplatzabdeckung in den Steckplatz (1). ► Befestigen Sie die Schraube (2, optional). 1 Baugruppen-Verriegelung zuklappen 1 ► Klappen Sie die Baugruppen-Verriegelung zu (1). ► Bringen Sie den Gehäusedeckel wieder am Gehäuse an (siehe Kapitel "Gehäusedeckel wieder anbringen", Seite 39). Wenn Sie eine Baugruppe ein- oder ausgebaut haben, dann prüfen Sie im BIOS-Setup die Einstellungen für den entsprechenden PCI-Steckplatz.
Systemerweiterungen Kühlkörper aus- und einbauen Kühlkörper ausbauen ► Entfernen Sie den Gehäusedeckel (siehe Kapitel "Gehäusedeckel entfernen", Seite 38). ► Lösen Sie die Lüfterleitungen vom Mainboard. ► Lösen Sie die Schrauben (1). 1 ► Heben Sie den Kühlkörper aus dem 1 1 Gehäuse (2) heraus. 2 1 Betreiben Sie das Gerät nie ohne Kühlkörper! Bauen Sie den Kühlkörper vor der Inbetriebnahme wieder ein.
Systemerweiterungen Erweiterungen auf dem Mainboard Wie Sie den Hauptspeicher oder den Prozessor Ihres Geräts hochrüsten können, finden Sie im Handbuch zum Mainboard. Mainboard Hauptspeicher Prozessor Lithium-Batterie Erweiterungen Hauptspeicher hochrüsten ► Entfernen Sie den Gehäusedeckel (siehe Kapitel "Gehäusedeckel entfernen", Seite 38). ► Rüsten Sie den Hauptspeicher hoch, wie im Handbuch zum Mainboard beschrieben.
Systemerweiterungen Lithium-Batterie tauschen Damit die Systeminformation dauerhaft gespeichert werden kann, ist eine Lithium-Batterie eingebaut, die den CMOS-Speicher mit Strom versorgt. Wenn die Spannung der Batterie zu niedrig oder die Batterie leer ist, wird eine entsprechende Fehlermeldung ausgegeben. Die Lithium-Batterie muss dann ausgetauscht werden.
Technische Daten Technische Daten Elektrische Daten Eingehaltene Sicherheitsstandards: Schutzklasse: Nennspannungsbereich: Nennfrequenz: Nennstrom maximal: Gerät mit Bildschirmsteckdose: davon: Wert der Bildschirmsteckdose: Gerät ohne Bildschirmsteckdose: Abmessungen Breite/Tiefe/Höhe: IEC 60950, EN 60950, UL 60950 CSA 22.2 No.60950-1 I 100 V – 240 V 50 Hz – 60 Hz 100 V – 240 V 5,0 A – 2,5 A 100 V – 240 V 2,0 A – 1,0 A 100 V – 240 V 3,5 – 1,5 A 340 mm / 383 mm / 98 mm / 13.39 in x 15.09 in x 3.
Stichwörter Stichwörter A Alphanumerisches Tastaturfeld 26 Anschließen Maus 19 PS/2-Maus 19 PS/2-Tastatur 19 Tastatur 19 USB-Tastatur 19 Anschlüsse 7 Anzeigen Gerät 25 Audioausgang 18 Audioeingang 18 Aufstellfüße 15 Austauschen, Lithium-Batterie 66 B Batterie 66 Baugruppe ausbauen 56 einbauen 56 Betriebslage senkrecht 15 Bildschirm anschließen 18 ausschalten 24 einschalten 23 Bildschirmanschluss 18 Bildschirmarbeitsplatz 14 BIOS-Setup 28 einstellen 28 Konfiguration 28 Sicherheitsfunktionen 30 Systemeinstel
Stichwörter Installation Erstes Anschalten Software 21–22 21 K Kabel siehe Leitung 17 Kensigton Lock 28 Kette 28 Komponenten einbauen/ausbauen Kopfhörer 18 L LAN-Anschluss 18 Laufwerkskäfig aufklappen 40 zuklappen 41 Leitung Anschließen 17 lösen 17 Lieferinhalt 13 Line in 18 Line out 18 Lithium-Batterie 65 tauschen 66 Low-Profile-Baugruppe R Recycling 36 60 M Mainboard Erweiterungen 65 Maus anschließen 19 Mausanschluss 18 Mikrofonanschluss 18 N Netzadapter anschließen 16 Niederspannungsrichtlinie 11
Stichwörter Tasten 26 Alt Gr 27 Control 27 Ctrl (Strg) 27 Cursor-Tasten 26 Eingabetaste 26 Enter 26 Menütaste 27 Num 27 Return 26 Shift 27 Starttaste 27 Steuerungstaste 27 Strg (Ctrl) 27 Strg+Alt+Entf (Ctrl+Alt+Del) Umschalttaste 27 Tastenkombinationen 26–27 Tauschen Lithium-Batterie 66 Transport 10–11 U Übersicht Gerät 70 Unversal Serial Bus 18 USB-Anschluss 19 Geräte anschließen 20 Maus anschließen 19 Tastatur anschließen 19 USB-Geräte anschließen 20 V Verpackung 13 auspacken 13 Verplomben 28 27 W Wec