Operation Manual

Getting started
Connecting external devices
Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before con necting external devices!
Do not connect or disconnect cables d uring a thunderstorm.
Always take hold of the actual plug. Neve r unplug a cable by pulling the cab le itse lf.
Connect and disconnect the cables in the order described below.
Connecting the cables
► Turn off all power and equipment switches.
CordCable,
► Remove all power plugs from the grounded mains outlets.
► Connect all the c ables to the device and the external devices. Please make sure that you
always observe the safety notes provided in "
Important notes", Page 10.
► Plug all data communication cables into the appropriate sockets.
► Plug all power cables into the grounded mains ou tlets.
USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.
Additional information c an be found in "
Connecting external devices to the USB
ports", Page 20 and in the documentation for the USB devices.
Disconnecting the cables
► Switch off al
l affected devices.
Cable,
► Remove all power plugs from the grounded mains outlets.
► Unplug all d
ata communication cables from the appropriate sockets.
► Disconnect all of the cables from the device and from the external devices.
Fujitsu 17