Operation Manual
System expansions
Reinstalling a slot cover
2
1
► Push the s lot cover into the slot ( 1).
► Tighten the screw (2, optional).
Installing the bo
ard ca g e
2
1
► Close t
he retaining mechanism on the board cage (1).
► Insert the board cage into the casing (1).
► Fit th
e casing cover back onto the casing (see Chapter "
Reattaching the cas ing cover.", Page 3 8).
If you
have installed or removed a board, please check the relevant PCI
slot
settings in the BIOS Setup. If necessary, change the settings. Further
info
rmation is provided in the PCI board documentation.
58 Fujitsu