Operation Manual

System expansio ns
Installing a board
2
1
► Push the board into the slot (1)
until it engages.
► Tighten the screw (2, optional).
► If necessary, conn ect the cables to the board.
If you have installed or remo ved a board, please check the relevant PCI
slot settings in the BIOS Setup. If necessary, change the settings. Further
information is provided in the PCI board documentation.
Removing boards
► If necessary,
disconnect the cables which are connected t o the board.
2
1
► Undo the screw (1, optional).
► Pull th e boa
rd out of the slot (2).
► Place the board in suitable packag ing.
Fujitsu 61