Operation Manual

System expansions
Reinstalling a slot cover
2
1
► Push the s lot cover into the slot ( 1).
► Tighten the screw (2, optional).
Closing the board retaining mechanism
1
► Fold the board retaining mechanism to the closed position (1).
► Fit the casing cover back onto the casing (see Chap ter "
Reattaching the cas ing cover.", Page 3 8).
If you have installed or removed a board, please check the relevant PCI
slot settings in the BIOS Setup. If necessary, change the settings. Further
information is provided in the PCI board documentation.
62 Fujitsu