Operation Manual
System expansio ns
Installing and removing heat si
nks
Removing the heat sink
► Remove the casing cover (see Chapter "Removing t he casing cover", Page 37).
► Disconnect the fan cables from th e main board .
1
1
1
12
► Undo the screws (1).
► Remove the heat sink from the casing (2).
Never operate the device without the heat sink fitted! R einstall the
heat sink before switching on the device.
Installing th e heat sink
2
2
2
2
1
► Insert the heat sink into the casing (1),
making sure to correctly align the screw
holes on the heat sink with the screw holes
on the mainboard a nd taking note of the
arrows on the heat sink. The arrows must
point to the rear of th e device.
► Tighten the screws (2) in a crosswise
fashion.
► Connect th e fan cables to the mainboard.
► Fit the casing cover back on to th e casing (see Chapter "
Reattaching the casing cover.", Page 38).
Mainboard expansions
Details on how to upgrade the m ain memory or the processor of your device
can be found in the manual for the mainboard.
UpgradesLithium batte ryProcessorMainmemoryM ai nboard
Upgrading main memory
► Remov
e the casing cover (see Chapter "
Removing the casing cover", Page 37).
Mainmemory,
► Upgrade the memory according to the description in the manual for the m ainb oard.
► Fit t
he casing cover back onto the casing (see C hapter "
Reattaching the casing cover.", Page 38).
Fujitsu 63