Operation Manual

Operation
Indicators on the device
Indicators,Device
The indicat ors are on the front of the c asin g. Which indicators are available on your
device depends on the configuration level you have selected.
1234
No. Indicator Description
1
Indicator for optional
components, e.g.
SmartCard reader
The indicator lights up when optional components, e.g. SmartC a rd
reader, are accessed.
2 Drive indicator
The indicator l
ights up when the CD-ROM or DVD drive in the
device is acce
ssed. Never under any circumstances remove the
CD/DVD while t
he indicator i s lit.
3 Power-on ind
icator
Caution: When energy saving mode is active, the device must
not be switched off at the main power switch (if present) or
disconnected from the mains, as this may result in data loss.
• The indicator is illuminated:
The device is switched on.
• The indicator is flashing:
The device is in energy-saving m ode. After being switched on
with the ON/O FF switch, the device powers up or returns to the
state it was in before it entered energy-saving mode.
• The indicator is not lit:
The device is switched off.
4 Hard disk indicator The indicator lights up when the hard disk drive in the device
is being accessed.
Fujitsu 25