Technical data

System expansions

Fujitsu Technology Solutions 67

Replacing second hard disk in 3 ½ inch drive cage

► Open the casing (see "Opening the casing").

► Remove the cross-piece (see "

Removing the cross-piece”).

► Fold up the drive cage (see "

Folding up the drive cage").

Removing second hard disk

► Remove the screw (1).

► Disconnect the cables from the hard

disk.

► Remove the drive the direction of the

arrow out of the casing.

Installing second hard disk

► Slide the drive into the casing in the

direction of the arrow.

► Secure the hard disk with the

screws (1).

► Connect the cables.

► Fold down the drive cage (see "

Folding

down the drive cage").

► If necessary, mount the plastic drive cover (see "Installing plastic drive cover").

► Replace the cross piece (see "

Installing the cross-piece").

► Close the casing (see "

Closing the casing").

It may be necessary to modify the entry for the drive in the BIOS Setup.