Operation Manual

Getting started
Connecting external devices
Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before con necting external devices!
Do not connect or disconnect cables d uring a thunderstorm.
Always take hold of the actual plug. Neve r unplug a cable by pulling the cab le itse lf.
Connect and disconnect the cables in the order described below.
Connecting the cables
► Turn off all power and equipment switches.
CordCable,
► Remove all power plugs fro m the gro unded mains outlets.
► Connect all the cables to the device and the external devices. Please m ake sure that you
always observe the safety notes provide d in "
Important notes", P age 7.
► Plug all data c ommunicat ion cables into the appropriate socke ts.
► Plug all power cables into the grounded m ains outlets.
USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.
Additional information c an be found in "
Connecting external devices to the USB
ports", Page 17 and in the documentation for the USB devices.
Disconnecting the cables
► Switch off al
l affected devices.
Cable,
► Remove all power plugs fro m the gro unded mains outlets.
► Unplug all d
ata communication cables from the appropriate sockets.
► Disconnect all of the cables from the device and from the e xternal devices.
Fujitsu 13