Operation Manual

Operation
Indicators on the d evice
Indicators,Device
The indicators are on the front of the casing. Which indicators a re available on your
device depends on the configuration level you have selected.
3
1
2
1 = Drive indicator, e.g. DVD
2 = Power-o n indicator
3 = Hard disk indicator
No. Indicato r Description
1 Drive indicator
The indicator lights up w hen th e CD-ROM o r DVD drive in the
device is accessed. Never under any circumstances remove the
CD/DVD while the indicator is lit.
2 Power-on indicator
Caution: When energy saving mode is active, the device must
not be switched off at the main po wer switch (if present) or
disconnected from the mains, as this may result in data loss.
• The indicator is illuminated:
The device
is switched on.
•Theindicatorisflashing:
The devic
e is in energy-saving m ode. After being switched on
with the O
N/OFF switch, the device powers up or returns to the
state it w
as in before it entered e nergy-saving mode.
• The indicator is not lit:
The dev
ice is switched off.
3Harddi
sk indicator
The indicator lights up when the hard disk drive of the device is
accessed.
20 Fujitsu