Operation Manual
System expansio ns
Installing and removing an accessible 3
1
/
2
inch drive
Installing an accessible dri
ve
► Open the casing (see "Opening the casing", Page 31).
Diskettedri ve,Diske ttedrive,
► Ifthereisanaccessible5
1
/
4
" drive, remove the drive (see "Removing
an accessible dr ive", Page
33).
► Remove the front panel from th e casing.
► From t he inside, press th
e plastic drive co ver out of the front panel.
1
► Break out the
pre-stamped metal cover on the drive b ay opening with a screwdriver (1).
► Secure the fro nt panel on the casing again.
2
2
1
► Slide the drive into the casing (1). Make sure that the screw holes are aligned.
► Fasten the drive into place with the screws (2).
► Plug the data and the power supply connectors into the drive. Make sure the polarity is correct.
Fujitsu 35