Operation Manual
System expansio ns
Installing and removing the har
ddiskdrive
Harddiskdrive,Harddiskdrive,Harddiskdrive,
Removing a hard disk drive
► Open the casing (see "Opening the casing", Page 31).
Harddiskdr ive,
► Remove all connected cables (data cable, power supply) from the drive.
1
1
1
1
2
► Undo the screws (1) and gently press against the hard disk drive from underneath.
► Pull the drive backwards a short way out of th e bay in th e direction of the arrow (2).
The drive now protrudes slightly out of the bay.
► Pull the drive completely out of its bay. Make sure that you are not t ouch ing other components.
► If necessary, m ake the required settings on the remaining hard disk drive.
► Close the casing (see "
Closing the casing" , Page 32).
It may be necessary to modify the entry for the remaining drives in the BIOS Setup.
You will need a SATA cable to install a second hard disk on the listed device variants.
Fujitsu 37