Operation Manual

Getting started

Gettingstarted

Please observe the safety information in the "Importan t notes", Page 9 chapter.

Unpacking and checking the delivery

It is recommended not to throw away the original packaging material! It may be

required for reshipment at some later date.

PackagingContentsofd eliveryPackaging,

► Unpack all the individual parts.

► Check the contents of the package f

or any visible damage caused during transport.

► Check whether the delivery c onforms to the details in the delivery note.

► Should you discover that the deli

very does not correspond to the delivery

note, notify your local sales out

let immediately.

Steps for initial setup

Preparingforﬁ rstuse, overviewPreparingforu se,

Only a few steps are n ecessary to put your new device into operation for the ﬁrst time:

• Select a location for device and set up device

• Connecting external devices

• Check the voltage at the mains outlet and co nnect the device t o an electrical outlet

• Switch the device on

You will learn more about the individual steps in the following sections.

External devices

If you have received other e xternal devices in addition to your own device (e.g.

a printer), do not connect these until after the initial installation. The following

sections describe how to connect these external devices.

Drives and b oard s

If you have received drives or boards w ith your device, please do not install

them until after ﬁrst-time setup. How to install d rives and boards is described

in the "

System expansio ns", Page 35 chapter.

12 Fujitsu Technology Solutions