Operation Manual

Getting started
Settingupthedevice
WorkstationErgonomicDevice
When setting up your device, p lease read the r ecommendations and
safety notes in the "Safety" manual.
We recomme nd that you place your device on a surface which is not slippery. In
view of the many different finishes and varnishes used on furniture, it is possible
that the rubber feet will mark the surface they stand on.
Depending on the location of your device, troublesome vibrations and noises
may occur. To prevent this, a distance of at least 10 mm should b e maintained
from other devices on casing sides without ventilation surfaces.
In order to avoid overheating, do not cover the ventilation areas
of the monitor or the device.
Do not stack several devices on top of each other.
Do not expose the device to extreme ambient conditions (see "
Technical data", Page 62,
section "Ambient conditions"). Protect the d evice against dust, humidity and heat.
Operating position
Use the device only in the verti
cal operating position.
Connecting the machine to the mains
Mainsadapter,
2
1
► Connect the mains cab
le to the mac hine (1).
► Plug the mains plug into a three-pin socket (2).
Fujitsu Technology Solutions 13