Operation Manual

System expansions
► Close the casing (see "Closing the casing", Page 38).
If yo u have installed or removed a PCI board, please check the relevant PCI
slot settings in the BIOS Setup. If necessary, change the settings. Further
information is provided in the PCI board documenta tion.
Low-profile boards
Low-profileboar d
You will need to fit a corresponding slot adapter first before you can install a
low-profile board in a normal board slot.
Two-piece slot c overs are fitted to the slots intended for low-pro file boards. The
two pieces are joined together by a screw.
Do not throw away the slot cover. For cooling, protection against fire and in order to
comply with EMC regulations, you must refit the slot cover if you remove the board.
EMC,electrom agnet
iccompatibility
► Remove the req uired slot cover (see "Installing and rem oving a board", Page 45).
Fitting a slot adapter
2
1
► Fit the slot ad apter to the slot cover of the low-profile board (1) and screw tight ( 2).
Low-profileboar ds,

Now you can install the low-profile board in a suitable slot like a normal board
(see "
Installing and removing a board", Page 45).
48 Fujitsu Technology Solutions