Operation Manual

System expansions
Removing WLAN module from carrier
1
1
► Undo the screws (1).
► Pull the WLAN module out of the holder
in the direction of the arrow.
Installing USB port
s on the rear panel
Depending on your device configuration, an installation slot for USB interfaces is provided
on the back of the casing. A s a result, no boa rd slot is occupied.
1
► Insert a screwdriver into the opening and break out the pre-stamped installation
opening by moving it backwards and forwards.
USBports,USBports,
► Slide the USB
ports into the slot and secure them with the s crew (1).
► Connect the USB cable to the mainboard – refer to the mainboard manual for details.
Fujitsu Technology Solutions 59