Technical data

Getting started

Gettingstarted

Please observe the safety information in the "Important notes", Page 9 chapter.

Unpacking and checking the delivery

It is recommended not to throw away the original packaging material! It may be

required for reshipment at some later date.

PackagingContentsofdeliveryPackaging,

► Unpack all the individual p arts.

► Check th e contents of the package f

or any visible damage caused during transport.

► Check whether the delivery conforms to the details in the delivery note.

► Should you discover that the deli

very does not correspond to the delivery

note, notify your local sales out

let immediately.

Steps for initial setup

Preparingforﬁ rstuse,ove rviewPreparingforu se,

Only a few steps a re necessary to put your new device into operation f or the ﬁrst time:

• Select a location for device and set up device

• Connecting external device s

• Check the voltage at the mains outlet and co nnect the device to an electrical outlet

• Switch the device on

You will learn more about the individual steps in the following sections.

External devices

If you have received other external devices in addition to your own device ( e.g.

a printer), do not connect these until after the initial installation. The following

sections describe how to connect these external devices.

Drives and b oard s

If you have received drives or boards with your device, please do not install

them until after ﬁrst-time setup. How to install drives and boards is described

in the "

System expansions", Page 35 chapter.

12 Fujitsu Technology Solutions