Technical data

Getting started
Switching on for the first time: installing the software
Installing,Software,Installing,
Once the installation has been started the device m ust not be switched
off, unless the installation has been completed.
During installation, the device may only be rebooted when you are requested to do so!
The installation w ill otherwise not be carried out correctly and the contents
of the hard disk must be completely restored.
If the d e vice is integrated into
a network, the user and server details as w ell as
the network protocol are requir
ed during the software installation.
Contact your network administr
ator if you have any questions about these settings.
When you switch on the device for t
he first time, the supplied soft ware
is installed and configured. Pla
n a reasonable amount of time for this,
as this process must not be inter
rupted.
You m ay need the licence number
for Windows during the installation. The licen ce
number is located on a sticker o
n your device.
Switching on monitor and device
Device,Monitor,
Depending on the version, the device may be equipped with a main power switch
on the back of the device in addition to the ON /OF F button on the front. As a
result, there are different ways to switch on the two variants.
► Switch the monitor on (see the operating manual for the monitor).
► Switch the device on. To do this, follow th e instructions below.
14 Fujitsu Technology Solutions