Technical data

Getting started
Connecting external devices
Read the documentation on the extern al device before connecting it.
With the exception of USB devices, always remove all power plugs
before connecting external devices!
Do not connect or disconnect cables during a thunderstorm.
Always take hold of the actual plug when disconnecting a cable. Never pull the cable!
Connect and disconnect the cables in the order described below.
Cable connecting
► Switch off all affected devices.
CordCable
► Remove power plugs from the mains outlets for all devices.
► Plug all cables into the device and peripherals. Please make sure that you always
observe the safety notes provided in "
Important notes", Pag e 9.
► Plug a ll data communication cables into the sockets provided for the data
/ telecommunication networks.
► Plug all power cables into the grounded m ains outlets.
Disconnecting cables
► Switch off all affected devices.
Cable
► Remove power plugs from the mains outlets for all devices.
► Unplug all data communication ca bles from the utility sockets.
► Unplug all cables from the d evice and peripherals.
USB devices are hot-pluggable. This means you can connect and disconne ct
USB cables while your device is switched on.
Additional information can be found in "
Connecting external devices to the USB
ports", Page 21 and in the documentation for the U SB devices.
Fujitsu Technology Solutions 17