Technical data

Operation
Operation
Switch the device on
► If necessary, switch the monitor on (see the operating manu al for the monitor).
Device,Monitor,
► Switch on the device using the main
power switch located on the rear o f the device (if present).
► Press the ON/OFF switch on the front of the device.

The power-on indicator lights gr
een and the device is started.
Switching on a device when the lithium battery
is discharged (0-Watt devices)
A 0-Watt device consumes no current when it is switched off and in the quiescent state.
Your 0-Watt device is equipped with an emergency on button (primary resume button) which c an be
used if it can no longer be started, for instance because the lithium battery is discharged.
After the emergency on button (1) has been pressed for a short time, the device can be
switched on again using the ON/OFF s witch at the front of the device.
1
► Press the em ergenc
y on button (1) to start the device.
22 Fujitsu Technology Solutions