Technical data

System expansions
Installing the ventilation duc
t
Ventilationduct
When fitting the ventilation duct, be careful not to damage the
processor cooler(s) on the mainboard.
1
► Insert the latches on t he underside of the ventilation duct into the correspon ding slots in the casing.
► Press the ventilation duct into the casing in the direction of the arrow (1)
so that the locking hook is felt to engage.
► Reconnect the cables that were previously disconnected.
► Hook the wires into the holder on the ventilation duct.
► Fold down the d rive cage (see "
Closing the drive cage", Page 42).
► Close the casing (see "
Closing the casing", Page 38).
44 Fujitsu Technology Solutions