Operation Manual

Troubleshooting and tips
Monitor remains blank
Cause
Remedy
Monitor is switched off ► Switch your monitor on.
Power saving h as been activated (screen is
blank)
► Press any key on the keyboa rd.
or
► Deactivate the screen saver. If
necessary, enter the appropriate
password.
Brightness control is set to dark ► Adjust the brightness control. For detailed
information, please refer to the operat ing
manual supplied with your monitor.
Power cable not connected
► Switch off the monitor and the device.
► Check that the monitor pow er cable is
properly connected to the monitor and to
a grounded mains o utlet or to the monitor
socket of the device.
► Check that the device power cable is
properly plugged into the device and a
grounded mains outlet.
► Switch on the monitor and the device.
Monitor cable not connected
► Switch off the mo
nitor and the device.
► Check that the monitor cable is properly
connected to the device and monitor.
► Switch on the m
onitor and the device.
Incorrect setting for the monitor
► Restart the s
ystem.
► Press
F8
while the system is booting.
► Start the sy
stem in Safe Mode.
► Set up the monitor as described in the
documentation for your operating system
and monitor.
Fujitsu 33