Operation Manual

System expansio ns
Installing and removing WLAN an
tennas
If you have installed a suitable low-profi le board, you can install and remove the
associated WLAN antennas as described below.
Installing WLAN antennas
• A suitable board is installed (see chapter "Installing a board", Page 55).
1
2
3
3
► Working in the direction of the arrow (1), place the WLAN antennas onto
the plug-in positions of the board (2).
► Secure th e W L
AN a ntennas by turning in th e direction of the arrow (3).
► Align the WLAN antennas as required.
Fujitsu 59